Led plate lights

new

« Prev
1
Next »

ebay
New Member

Posts: 4

Led plate lights Nov 3, 2016 18:41:42 GMT

Quote

Post by ebay on Nov 3, 2016 18:41:42 GMT

Hi all,
Yesterday I replace successfully bulbs of plate with led lamp, after that I change the adaption by obdeleven app (by macro function) and then it works correctly without warning.
The strange thing is that after a few our the warning (check plate light) appeared.

So, this evening I try the change by coding,

Module 9->security access set to 31347

Adaptation -> Function 10
Leuchte25KZL HA59-lasttyp set to 43
Leuchte25KZL HA59-dimmwert set to 127

but I found that the value of that values was just changed correctly.

In any case I have the warning "check plate light", yet...

maxcowe New Member Posts: 40	Led plate lights Nov 3, 2016 21:05:29 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by maxcowe on Nov 3, 2016 21:05:29 GMT Have you tried scanning your car then deleting the fault manually?

dv52 (Australia)
Moderator

Posts: 6,057

Led plate lights Nov 3, 2016 21:05:39 GMT

Quote

Post by dv52 (Australia) on Nov 3, 2016 21:05:39 GMT

Nov 3, 2016 18:41:42 GMT ebay said:

ebay: I have no idea what the App does to the control module, but I suggest that you check the setting on the following adaptation channel

Leuchte25KZL HA59 - Lasttyp 25

The setting should have the word "LED" in its description - likely it is 43 - allgemeine LED. It should NOT be 18 - 2* 5W.

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

Led plate lights

Post by ebay on Nov 3, 2016 18:41:42 GMT

Post by maxcowe on Nov 3, 2016 21:05:29 GMT

Post by dv52 (Australia) on Nov 3, 2016 21:05:39 GMT

Shoutbox