Getting rid of "Take over steering!' warning.

new

« Prev
1
Next »

beancat
New Member

Posts: 3

Getting rid of "Take over steering!' warning. May 4, 2020 18:29:29 GMT

Quote

Post by beancat on May 4, 2020 18:29:29 GMT

Hello everyone! I've recently started using my OBD11 and so far, I've added lane tracking (which works pretty well on the highway!). My only issue is that every 15 seconds, I get a loud ding with "take over steering!" displayed on my dash, and lane assist is deactivated till you steer again. I've seen several people saying that it's not possible to disable this annoying warning, and to just do the "water bottle trick"...I refuse to believe that there's not a way to disable this. If anyone has found a way to disable it, that info would be greatly appreciated!

Also feel free to comment any changes that you've made to your adaptive cruise/lane assist. I'm currently also looking to add traffic jam assist with stop and go....but that dinging is my priority. Thanks in advance!

newty
Moderator

Grumpy German know it all

Posts: 841

Getting rid of "Take over steering!' warning. May 4, 2020 18:36:10 GMT

Quote

Post by newty on May 4, 2020 18:36:10 GMT

1) Nope. No chance for removing the warning. You can enable EA Variant1 in 3q0-type cameras, but thats most you can get, if not already set from factory. Everything else would need an entirely hacked software for the camera or using development software on the camera.
2) Traffic Jam Assist is a Job for VCP, as you have to install a factory parameter set enabling this. Generally, a 60 second task using the right tool. OBD11 cannot install parameter sets.

Please be so kind to set your app's language to English when posting screenshots and before trying out coding suggestions.
This will help everbody to understand and advise.

beancat New Member Posts: 3	Getting rid of "Take over steering!' warning. May 4, 2020 19:05:00 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by beancat on May 4, 2020 19:05:00 GMT You mentioned something about enabling a camera system...Would that delay the warning? Or what would that do?

newty
Moderator

Grumpy German know it all

Posts: 841

Getting rid of "Take over steering!' warning. May 5, 2020 7:38:10 GMT via mobile

Quote

Post by newty on May 5, 2020 7:38:10 GMT

EA1 (Emergency Assist Type 1) will enable a three stage warning: Friendly bing (LA still enabled), Agressive beep (LA still on), Agressive beep and Brake jolt (LA now turns off).

With the real EmergencyAssist the car starts to slow down after that sequence (depends on TJA), so everything is maxed out that way.

This all needs a 3q0 980 654 camera, just check the info of your A5 unit

Please be so kind to set your app's language to English when posting screenshots and before trying out coding suggestions.
This will help everbody to understand and advise.

beancat New Member Posts: 3	Getting rid of "Take over steering!' warning. May 5, 2020 14:11:52 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by beancat on May 5, 2020 14:11:52 GMT I'll have to check that out. Thank you!

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

Getting rid of "Take over steering!' warning.

Post by beancat on May 4, 2020 18:29:29 GMT

Post by newty on May 4, 2020 18:36:10 GMT

Post by beancat on May 4, 2020 19:05:00 GMT

Post by newty on May 5, 2020 7:38:10 GMT

Post by beancat on May 5, 2020 14:11:52 GMT

Shoutbox