oktay
New Member
Posts: 1
|
Post by oktay on May 1, 2020 11:47:21 GMT
Hi,
I installed a camera and coded it but I still got an error
(camera works)
6C Rear view camera
1error
Fault Code: B201000
Status: static
|
|
|
|
Post by jacobvrs on Jun 13, 2020 7:07:38 GMT
Have you calibrated the camera after installation? If not, then the error is going to be “no basic settings” which means, it has to be calibrated.
|
|
|
|
Post by ruairi on Jan 29, 2023 22:26:35 GMT
Hi all, I'm getting a few databus missing message errors in this module, seems like the previous owner retrofitted this so no idea where it came from. Camera works but there are no guide lines and I can't clear the fault codes. Would appreciate any advice:
OBDeleven data log
Date: 2023-01-29 21:53
VIN: WVWZZZ3CZJP001497
Car: Volkswagen Passat
Year: 2018
Body type: Variant
Engine: CRLB
Mileage: 55383 KM
---------------------------------------------------------------
6C Rear View Camera
System description: RVC Compact+
Software number: 5Q0980568
Software version: 0100
Hardware number: 5Q0980568
Hardware version: H04
ODX name: EV_CamSysRVRVCARPANAMQBAB
ODX version: 006008
Long coding: 0184020143002017000048
Trouble codes:
U112100 - Databus missing message
static
Date: 2023-01-29 21:53:40
Mileage: 55383 km
Priority: 6
Malfunction frequency counter: 1
Unlearning counter: 137
ARA_error_bits: 0
---: 0.0000 s
Reason: Environmental conditions
current likeliness: 0.0000
---: Passive
U112100 - Databus missing message
static
Date: 2023-01-29 21:53:40
Mileage: 55383 km
Priority: 6
Malfunction frequency counter: 1
Unlearning counter: 137
ARA_error_bits: 0
---: 0.0000 s
Reason: Environmental conditions
current likeliness: 0.0000
---: Passive
U112100 - Databus missing message
static
Date: 2023-01-29 21:53:39
Mileage: 55383 km
Priority: 6
Malfunction frequency counter: 1
Unlearning counter: 137
ARA_error_bits: 0
---: 0.0000 s
Reason: Environmental conditions
current likeliness: 0.0000
---: Passive
U112100 - Databus missing message
static
Date: 2023-01-29 21:53:40
Mileage: 55383 km
Priority: 6
Malfunction frequency counter: 1
Unlearning counter: 137
ARA_error_bits: 0
---: 0.0000 s
Reason: Environmental conditions
current likeliness: 0.0000
---: Passive
|
|
|
|
Post by ruairi on Jan 30, 2023 15:43:41 GMT
So I managed to clear most of these by playing around with what was installed/not installed, and I now have guidelines as well. In 6C Long Coding I set equipment_ahk to not installed and equipment_ARA_optical to not installed. I also set equipment_epb to installed. From what I've read online it seems to be a Highline camera but when I disable the low camera in 5f I don't get any picture at all.
OBDeleven data log
Date: 2023-01-30 14:31
VIN: WVWZZZ3CZJP001497
Car: Volkswagen Passat
Year: 2018
Body type: Variant
Engine: CRLB
Mileage: 55392 KM
---------------------------------------------------------------
6C Rear View Camera
System description: RVC Compact+
Software number: 5Q0980568
Software version: 0100
Hardware number: 5Q0980568
Hardware version: H04
ODX name: EV_CamSysRVRVCARPANAMQBAB
ODX version: 006008
Long coding: 01840201C2002010000040
Trouble codes:
U112100 - Databus missing message
static
Date: 2023-01-30 14:30:19
Mileage: 55392 km
Priority: 6
Malfunction frequency counter: 1
Unlearning counter: 138
ARA_error_bits: 0
---: 0.0000 s
Reason: Environmental conditions
current likeliness: 0.0000
---: Passive
|
|
|
|
Post by tdibluemotion on Mar 2, 2023 17:10:55 GMT
Go to 5F, adaptations "Car function List BAP Gen2. Then VPS_0x0B-> activated.
Then VPS_0x0B_msg_bus -> Databus infotainment.
Should work.
|
|
