|
|
Post by tautauf01 on Apr 28, 2020 17:38:43 GMT
Hi everybody,
First of all, sorry for my poor English
I have a Passat B8 which is equipped with front camera. I would like to code Lane Assist with my OBD11 Pro
I found the codes in the section "Coding and adaptations"
Somebody has already test these codes ? Is it easy to do ?
I also found codes for "Lane assist adjustements". What is it exactly ?
Thanks for all
|
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Jul 2, 2020 16:55:30 GMT
If you find the coding please share ( :
|
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Jul 12, 2020 23:04:20 GMT
Hi everybody,
First of all, sorry for my poor English
I have a Passat B8 which is equipped with front camera. I would like to code Lane Assist with my OBD11 Pro
I found the codes in the section "Coding and adaptations"
Somebody has already test these codes ? Is it easy to do ?
I also found codes for "Lane assist adjustements". What is it exactly ?
Thanks for all
Ok. I will answer after it found it by myself. Thank you anyway. Hope it help somone. Side Assist Coding A5: Byte 11, Bit 1 (SWA) 76: "Rear cross traffic": installed (Byte 3 Bit 1 enabled) 5F: Adaptions: Car Functions BAP: SWA_0x1A active, DAtabus extended, Car Function Gen2 menu display lane assistand active, lane asisstant over threshold high activated 44: Nothing needed 3C: Should be more or less self-explaining, without any data this (sample is 04 C0 02) 19: Enable 3C in Gateway, nothing else 17: Byte 11, Bit 3 active 03: Byte 29, Bit 7 active 5F are the 4 adaptions i mentioned. They are not 1 on 1 as they are described, but you will find them. 44 has no info about side assist, so nothing to do here |
|
