|
Post by jjc823 on Nov 1, 2016 12:03:29 GMT
Hello I was wondering if anyone figured out how to change their OBD start up logo on their dashboard with ODBeleven. With vagcom it's 17 dashboard long coding byte 9 bit 0-2 and there is a drop down menu. With obdeleven there isn't a drop down menu or bit 0-2. Anyone figure this out. You can change it to say A3, S3, A3 etron and RS3. This is for the dashboard OBD not the mmi. Any help?
|
|
|
Post by dv52 (Australia) on Nov 3, 2016 7:24:08 GMT
Hello I was wondering if anyone figured out how to change their OBD start up logo on their dashboard with ODBeleven. With vagcom it's 17 dashboard long coding byte 9 bit 0-2 and there is a drop down menu. With obdeleven there isn't a drop down menu or bit 0-2. Anyone figure this out. You can change it to say A3, S3, A3 etron and RS3. This is for the dashboard OBD not the mmi. Any help? Yes, you are correct. OBD11 displays the code-string for a control module to the user very differently than the long-coding-helper facility on VCDS. Instead, OBD11 has the "alphabetic" descriptor screens like the one below (notice the third panel - Start screen): The screen above can be accessed by selecting the Coding panel from the main screen for the Dashboard control module. Simply scroll-down the screen until you see the Start screen panel. Select this and you should see more "version numbers". Don
|
|
|
Post by Jjc0823 on Nov 4, 2016 11:21:20 GMT
Hello I was wondering if anyone figured out how to change their OBD start up logo on their dashboard with ODBeleven. With vagcom it's 17 dashboard long coding byte 9 bit 0-2 and there is a drop down menu. With obdeleven there isn't a drop down menu or bit 0-2. Anyone figure this out. You can change it to say A3, S3, A3 etron and RS3. This is for the dashboard OBD not the mmi. Any help? Yes, you are correct. OBD11 displays the code-string for a control module to the user very differently than the long-coding-helper facility on VCDS. Instead, OBD11 has the "alphabetic" descriptor screens like the one below (notice the third panel - Start screen): The screen above can be accessed by selecting the Coding panel from the main screen for the Dashboard control module. Simply scroll-down the screen until you see the Start screen panel. Select this and you should see more "version numbers". Don I tried every version and nothing changed on the OBD. Any other ideas
|
|
|
Post by Jjc0823 on Nov 4, 2016 11:22:20 GMT
Hello I was wondering if anyone figured out how to change their OBD start up logo on their dashboard with ODBeleven. With vagcom it's 17 dashboard long coding byte 9 bit 0-2 and there is a drop down menu. With obdeleven there isn't a drop down menu or bit 0-2. Anyone figure this out. You can change it to say A3, S3, A3 etron and RS3. This is for the dashboard OBD not the mmi. Any help? Yes, you are correct. OBD11 displays the code-string for a control module to the user very differently than the long-coding-helper facility on VCDS. Instead, OBD11 has the "alphabetic" descriptor screens like the one below (notice the third panel - Start screen): The screen above can be accessed by selecting the Coding panel from the main screen for the Dashboard control module. Simply scroll-down the screen until you see the Start screen panel. Select this and you should see more "version numbers". Don I tried every version and nothing changed on the OBD. Any other ideas
|
|
KLCC
New Member
Posts: 6
|
Post by KLCC on Jul 13, 2017 15:08:40 GMT
Try running the codes with engine off (key in ACC). Works for me... Version 2 = S3 logo, 3 = eTron logo.
|
|
|
Post by arshad on Jun 28, 2018 2:18:23 GMT
Do you know the coding to change the start up screen on the MMI? I have change the start up screen on my dashboard?
|
|