|
Post by cupra400 on Apr 21, 2020 13:11:26 GMT
Hi can anyone help newbie to obd11 here , I’ve done the change to increased traction but I’m told I have to reset adaptations and I cannot find that anywhere? Does it not work if I just change it and swipe across with green arrow ? As it’s says change successful?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 21, 2020 15:01:35 GMT
the old coding Select Control Unit 32 Lock Electronics Select Adaptations Then take Acoustic measure, wiring logic It should be set to Standard but you can change it to increased Traction from the drop down list. Save with Green Tick. Then Select Basic Settings in the same module and run resetting of all adaption values.
So this coding says in control unit 32 Select the Basic Settings Then from the list select resetting of all adaption values.
Hope that helps.
|
|
|
Post by cupra400 on Apr 21, 2020 15:32:13 GMT
It’s a brand new obd11 pro so not sure if it’s different but I done all that except last bit as that’s not there ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 21, 2020 16:21:31 GMT
What year is you car, what options do you have under basic settings then.
|
|
|
Post by cupra400 on Apr 21, 2020 16:30:11 GMT
65 plate and I can’t see anywhere that says basic settings?
|
|
|
Post by cupra400 on Apr 21, 2020 16:38:21 GMT
Basic settings says this feature is currently under development
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 21, 2020 17:01:25 GMT
Ahh you must be running on Apple phone then.
I cant say for sure but when I did it on my Cupra and then took it for a spirated drive I could feel the difference.
I dont know why you have to run the basic settings but in theory it should have worked, take her out for a run and see if you can feel the difference.
|
|
|
Post by cupra400 on Apr 21, 2020 17:08:46 GMT
Right looks like cause it’s iPhone and I’ve got pro that part isn’t available yet , so I hope all the changes still work that I’ve made today
|
|
|
Post by cupra400 on Apr 21, 2020 20:24:43 GMT
Can I also ask do I have to go and reset basic settings after every change I do ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 21, 2020 21:36:34 GMT
no this is one of the very few
|
|