|
Post by jimmyd on Apr 18, 2020 18:49:07 GMT
I'm hoping somebody can help me. I've retrofitted the cruise control stalk to my 06 A4 Avant which already has a compatible steering wheel module. I've tried using OBDeleven to code this in and have stumbled across the following issue. When attempting to locate the 'Coding II' function within 'Engine Module 1' it isn't available. I've tried using 'Long Coding' function within OBDeleven but this hasn't worked. OBDeleven has successfully allowed me to programme module 16 'Steering Control Unit' with value 0xx4x so I know the cruise switch is accepted by the steering module PCM.
Does anybody know how I can access Engine module 'Coding II' to enter value 11463 so the ECU recognises that the car has cruise?
Many Thanks
|
|
|
Post by crzylrd on May 5, 2020 20:35:22 GMT
Sounds like you are using next gen with iPhone. Some of the pro cababilities for iPhone is still under development so you need to use and Android phone to do the Coding II process. Good luck!
|
|