Post by aeroing on Apr 17, 2020 18:09:06 GMT
Hi,
I am retrofitted a reverse camera (Low) to my Scala (with OEM Camera 657 827 566) with Bolero Headunit. But there are still some coding issues because the 5F cannot be programmed with Byte 19 Bit 4, it causes Error 31. The STG 76 is programmed via long coding with RVC Installed. I found in the Adaptions channels "function_configuration_rvc" and activated there the RVC (see attachement).
The current behavior of the RVC is as followed:
I currently do not see the park pilot OPS screen and also not the camera picture when reversing (only beeping sound). I only see the park pilot OPS screen when the forward sensors are active caused by an obstacle. Also the manual activation via the push button of the car is not showing the OPS in the infotaiment. When the OPS is open and I change into the reversing mode I can switch manually to the camera and the picture works (so the installation and compatibility should be correct). The camera is installed to the reverse signal and constant 12V supply at the fuse box-
I hope someone can help me, maybe anyone has an factory RVC installed and can check the coding.
I am retrofitted a reverse camera (Low) to my Scala (with OEM Camera 657 827 566) with Bolero Headunit. But there are still some coding issues because the 5F cannot be programmed with Byte 19 Bit 4, it causes Error 31. The STG 76 is programmed via long coding with RVC Installed. I found in the Adaptions channels "function_configuration_rvc" and activated there the RVC (see attachement).
The current behavior of the RVC is as followed:
I currently do not see the park pilot OPS screen and also not the camera picture when reversing (only beeping sound). I only see the park pilot OPS screen when the forward sensors are active caused by an obstacle. Also the manual activation via the push button of the car is not showing the OPS in the infotaiment. When the OPS is open and I change into the reversing mode I can switch manually to the camera and the picture works (so the installation and compatibility should be correct). The camera is installed to the reverse signal and constant 12V supply at the fuse box-
I hope someone can help me, maybe anyone has an factory RVC installed and can check the coding.
