|
|
Post by sheroo on Apr 10, 2020 17:59:53 GMT
Has anyone managed to get this working without using the Apps?
|
|
|
|
Post by sheroo on Apr 15, 2020 16:53:38 GMT
I've managed to get this done.
|
|
|
|
Post by sheroo on Apr 15, 2020 18:54:30 GMT
5F control unit, pin is in 'security access', in adaptions you need to activate Developer mode. Then go into Testmode_video_speed_cutoff and change the speed_limit from 0 km/h to whatever you want.
|
|
|
|
Post by sarah1331 on Apr 17, 2020 16:41:53 GMT
5F control unit, pin is in 'security access', in adaptions you need to activate Developer mode. Then go into Testmode_video_speed_cutoff and change the speed_limit from 0 km/h to whatever you want. I have VIM activated and my value is still 0 |
|
|
|
Post by sheroo on Apr 18, 2020 1:02:51 GMT
Strange, mine is at 255
|
|
|
|
Post by sarah1331 on Apr 18, 2020 7:23:50 GMT
|
|
|
|
Post by sheroo on Apr 18, 2020 16:47:47 GMT
No, I used the method I described thus saving me 100 credits, maybe it's hit and miss...
|
|
|
|
Post by audi1234 on Apr 20, 2020 21:50:51 GMT
5F control unit, pin is in 'security access', in adaptions you need to activate Developer mode. Then go into Testmode_video_speed_cutoff and change the speed_limit from 0 km/h to whatever you want. 5F Control unit Adaptation-How to activate Developer mode? What is a security access number? Developer mode is not activated with the “20103” security access number. |
|
|
|
Post by sheroo on Apr 22, 2020 2:01:43 GMT
I'll test it tomorrow and come back to you.
|
|
|
|
Post by sheroo on Apr 22, 2020 15:09:05 GMT
Hi thecrazyones, make sure your bonnet is unlocked(opened), engine needs to be on but not running (though running worked for me also). In 5F first go to 'Change Service' and then select 'Development mode, right at the bottom, this will indicate that it is now active.
After that go into Adaptions, Testmode_Video_speed_cutoff and change the speed_limit value from 0km/h to whatever you want. It will prompt you for the pin but also give it to you, it should be 20103.
Good luck and do feedback how you get on.
|
|
|
|
Post by jeanotid on Apr 24, 2020 9:05:34 GMT
Hi thecrazyones, make sure your bonnet is unlocked(opened), engine needs to be on but not running (though running worked for me also). In 5F first go to 'Change Service' and then select 'Development mode, right at the bottom, this will indicate that it is now active. After that go into Adaptions, Testmode_Video_speed_cutoff and change the speed_limit value from 0km/h to whatever you want. It will prompt you for the pin but also give it to you, it should be 20103. Good luck and do feedback how you get on. Hi. I made the changes by following your procedure on VCDS, I managed to enter the access code 20103, when I change the value 0km / h by any other value, it does not work. I have an error message: request out of range. can you help me? Thanks |
|
|
|
Post by sheroo on Apr 24, 2020 14:20:51 GMT
Hi, what value are you entering, it should be between 0 and 255
|
|
|
|
Post by jeanotid on Apr 24, 2020 14:25:04 GMT
Hi, I tried 1,2,3,4, ..... up to 400. and I still have the error message
|
|
|
|
Post by sheroo on Apr 24, 2020 15:03:23 GMT
 Does your Diagnostic Section state 'Development Mode' or 'VW - diagnostic mode'? Also have you checked if your car can actually run vids? |
|
|
|
Post by jeanotid on Apr 24, 2020 15:10:33 GMT
I don't really know, use VCDS and I don't know where to see the developer mode
|
|
|
|
Post by sheroo on Apr 24, 2020 16:19:01 GMT
Ah sorry, I'm using OBDEleven Pro, not sure what else to suggest. Maybe try a dedicated VCDS Forum
|
|
|
|
Post by jeanotid on Apr 24, 2020 16:20:19 GMT
in vcds, there is « Test mode_video_speed_cutoff-PUN and also Testmode_video_soeed_cutoff-speed_limit.
maybe you need the pin code first, to change the speed later
|
|
|
|
Post by audi1234 on Apr 25, 2020 16:49:03 GMT
Hi thecrazyones, make sure your bonnet is unlocked(opened), engine needs to be on but not running (though running worked for me also). In 5F first go to 'Change Service' and then select 'Development mode, right at the bottom, this will indicate that it is now active. After that go into Adaptions, Testmode_Video_speed_cutoff and change the speed_limit value from 0km/h to whatever you want. It will prompt you for the pin but also give it to you, it should be 20103. Good luck and do feedback how you get on. You can't do it the way you tell me. The following message appears, but it does not work. (31) Function not available |
|
|
|
Post by sheroo on Apr 25, 2020 17:37:31 GMT
Is your diagnostic session in Development Mode?
|
|
|
|
Post by audi1234 on Apr 25, 2020 21:38:29 GMT
Yes. Changed to Development Mode.5F-> Change sevice -> Select diagnostic session: Development mode - Active 5F-> Adaptation -> Testmode_Video_Speed_cutoff-> speed_limit : 0 ㎞/h -> 255 km/h -> Pressed green button -> Security Access : 20103
Engine hood open, ignition on (engine not started) Are there any further procedures required?
![]()   ![]() i.ibb.co/M1MmdZR/A6-C8-VIM-0.jpg [/ img] [/ url]
|
|
|
|
Post by sheroo on Apr 27, 2020 1:04:07 GMT
Your diagnostic session states VW VW diagnostic mode, if you scroll up to the pic I posted it states Development mode.
You're not activating Development mode. I'll try to share pics tomorrow
|
|
hbx
New Member
Posts: 19
|
Post by hbx on May 14, 2020 17:25:35 GMT
a somewhat off-topic question.
VIM is cool, but where do you play your videos from? From SD-card?
My A7 doesn't have a CD/DVD-player and i havn't been able to play videos from Android auto (with USB-cable) or via a cable-connected phone (like a USB-memory).
|
|
|
|
Post by dvlpmt on Jul 17, 2020 23:23:51 GMT
I was able to activate VIM today, so full steps list:
1. 5F-> Change service -> Select diagnostic session: Development mode - Active
2. 5F-> Adaptation -> Developer Mode -> True
3. 5F-> Adaptation -> Testmode_Video_Speed_cutoff-> speed_limit : 0 ㎞/h -> 255 km/h -> (enter your value) and press/hold green button -> Security Access : 20103
Parking Brake active and Hood/Bonnet need to be opened.
Engine hood open, ignition on (engine not started)
|
|
|
|
Post by dellirium on Feb 17, 2021 7:04:21 GMT
Applied all steps, but when trying to save changes it writes that “Function is unavailable”.
Also how activate video playback?
|
|
|
|
Post by alexsp on Apr 29, 2021 20:39:28 GMT
I have some problems:
This voice exists:
1. 5F-> Change service -> Select diagnostic session: Development mode - Active
Those two voices don’t exist in adaption menu
2. 5F-> Adaptation -> Developer Mode -> True
3. 5F-> Adaptation -> Testmode_Video_Speed_cutoff-> speed_limit : 0 ㎞/h -> 255 km/h -> (enter your value) and press/hold green button -> Security Access : 20103
Parking Brake active and Hood/Bonnet is opened.
|
|
|
|
Post by chilenokevino on May 17, 2021 22:37:36 GMT
Having some problems even finding the "Testmode_Video_speed_cutoff" under Adapations.
I've tried the App portion of OBDeleven and it states as... "Not Supported". (Hood open, MMI On, Engine Not Started, Parking Brake On)
Mind you, I was able to change to the RS taillights no problem.
I have a 2021 Audi A7 E TFSI (USA)
Software Version 3385
MMI Software Version - 33.11.2
Support is telling me I need to do a full backup first?
|
|
|
|
Post by binaudi on May 26, 2024 10:33:19 GMT
Has anyone figured out how to get past the "Function not available" issue?
|
|
