jingo
Junior Member
Posts: 62 
|
Post by jingo on Apr 10, 2020 13:45:58 GMT
Hello I am looking for a solution to change the hybrid battery on my screen because my VW Passat and diesel vehicle. ibb.co/ZmgZHHq |
|
|
|
Post by vwjap on Apr 10, 2020 14:31:38 GMT
5F
Adaptions
Car_functions_adaptions_gen2
menu_display_hybrid:
Not activated
menu_display_hybrid_clamp_15_off:
Not activated
menu_display_hybrid_over_threshold_high:
Not activated
menu_display_hybrid_standstill:
Not activated
menu_display_hybrid_after_disclaimer:
Not activated
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 10, 2020 15:11:21 GMT
thank you for your answer its function but more
menu_display_battery_management_over_threshold_high:Not activated
5F
Adaptions
Car_functions_adaptions_gen2
menu_display_hybrid:
Not activated
menu_display_hybrid_clamp_15_off:
Not activated
menu_display_hybrid_over_threshold_high:
Not activated
menu_display_hybrid_standstill:
Not activated
menu_display_hybrid_after_disclaimer:
Not activated
|
|
|
|
Post by vwjap on Apr 10, 2020 16:16:03 GMT
O.K. what about?
Car_function_list_BAP_2
Hybrid_0x1D:
Not activated
Hybrid_0x1D_msg_bus:
Databus drivetrain
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 10, 2020 18:25:53 GMT
the last coding is to do what exactly
|
|
|
|
Post by vwjap on Apr 10, 2020 19:07:49 GMT
Make sure the first one (hybrid 0_0x1d) is not activated
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 10, 2020 19:22:24 GMT
|
|
|
|
Post by vwjap on Apr 10, 2020 19:52:20 GMT
The only other thing I can see to do with hybrid in adaptions is
Battery_Management_0x25:
Not activated
Battery_Management_0x25_msg_bus:
Databus drivetrain
Under BAP_2
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Apr 10, 2020 20:15:46 GMT
Are you trying to change the car image in the infotainment system to a different one ?
|
|
|
|
Post by vwjap on Apr 10, 2020 20:19:22 GMT
That can be done with mib2high toolbox, but it doesn’t work on a few systems, I thought he was just trying to get rid of the battery image in the car image
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Apr 10, 2020 20:21:39 GMT
^^ to be honest I dont fully understand what OP is asking about.
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 10, 2020 20:26:02 GMT
and for closing the boot with remote control for touran 2017
I tried this coding but did not work you have other help please
Module: 6D (Trunk electronics)
Security Access Code: 12345
Adaptation
- Channel: Activation using rear lid opening button in remote key - Touch function for closing New value: active
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Apr 10, 2020 20:28:48 GMT
^^ jingoSince I dont fully understand your question, could you please explain What are you trying to change? And on what car model? |
|
|
|
Post by vwjap on Apr 10, 2020 20:43:14 GMT
and for closing the boot with remote control for touran 2017 I tried this coding but did not work you have other help please Module: 6D (Trunk electronics) Security Access Code: 12345 Adaptation - Channel: Activation using rear lid opening button in remote key - Touch function for closing New value: active Do you have the button for closing it already in the car? |
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 10, 2020 20:47:13 GMT
yes i have the button
|
|
|
|
Post by vwjap on Apr 10, 2020 22:04:30 GMT
Just the one button or 2? Dot you have the foot thing? (I think that’s 2 button models)
Try it from 5ft away
|
|
|
|
Post by vwjap on Apr 10, 2020 22:18:44 GMT
Module: 6D (Trunk electronics) Security Access Code: 12345 Adaptation - Channel: Activation using rear lid opening button in remote key - Touch function for closing New value: active did you also activate the activation using rear lid unlocking switch? |
|
|
|
Post by Carolco on Apr 11, 2020 10:51:40 GMT
Why don’t you share a backup of your modules? It is more simply.....
I don’t understand the problems of Jingo
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 14:15:11 GMT
the original option of the car closing opening with the button but the problem the codege that I have shared here does not work with the remote key command.
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 14:31:30 GMT
Thanks for Vwjap
For Vić and Carolco
solution to change the hybrid battery on my screen because my VW Passat and diesel vehicle.
Here the pictures
ibb.co/ZmgZHHq
ibb.co/Jts4qZX
ibb.co/hmZVVFm
ibb.co/YB5pT0h
5F
Adaptations
Car_functions_adaptions_gen2
menu_display_hybrid:
Non activé
menu_display_hybrid_clamp_15_off:
Non activé
menu_display_hybrid_over_threshold_high:
Non activé
menu_display_hybrid_standstill:
Non activé
menu_display_hybrid_after_disclaimer:
Non activé
menu_display_battery_management_over_threshold_high:
Non activé
Car_function_list_BAP_2
Hybrid_0x1D:
Not activated
Hybrid_0x1D_msg_bus:
Databus drivetrain
Battery_Management_0x25:
Not activated
Battery_Management_0x25_msg_bus:
Databus drivetrain
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 14:41:30 GMT
Thanks again Vwjap
Who did not understand well here Vić et Carolco
I'm looking for this solution and for closing the boot with remote control for touran 2017
I tried this coding but did not work you have other help please
Module: 6D (Trunk electronics)
Security Access Code: 12345
Adaptation
- Channel: Activation using rear lid opening button in remote key - Touch function for closing New value: active
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Apr 11, 2020 15:36:02 GMT
Thanks for Vwjap For Vić and Carolco solution to change the hybrid battery on my screen because my VW Passat and diesel vehicle. Here the pictures ibb.co/ZmgZHHq ibb.co/Jts4qZX ibb.co/hmZVVFm ibb.co/YB5pT0h Copy and pasting the same sentence doesnt help me understand your question. Could you either rewrite it in english or write it in your own language if it is easier? |
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 15:41:27 GMT
You want to know exactly
|
|
|
|
Post by vwjap on Apr 11, 2020 16:05:49 GMT
Did you try both of these Just the one button or 2? Dot you have the foot thing? (I think that’s 2 button models) Try it from 5ft away Module: 6D (Trunk electronics) Security Access Code: 12345 Adaptation - Channel: Activation using rear lid opening button in remote key - Touch function for closing New value: active did you also activate the activation using rear lid unlocking switch? |
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 16:19:57 GMT
closing the boot with remote control It does not work
|
|
|
|
Post by vwjap on Apr 11, 2020 16:35:38 GMT
I know, but you need to answer the questions we ask for us to get an idea of what’s going on fella
Try closing it from 5-6 foot away, and/or wait 20 seconds, it may be a safety feature so it doesn’t come down on your head
There are TWO lines of code to enable it on some cars, have you done both (I wrote the other one further up there ^^^^)
Please don’t answer with unimformative posts, we need help to help you
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 17:32:01 GMT
The problem I need the coding to close the trunk with the remote control (remote) and also with the button inside (dashboard)?
Now I can just open but not close neither remotely nor dashboard button
|
|
|
|
Post by vwjap on Apr 11, 2020 18:00:43 GMT
Have you done the two things I’ve mentioned?
|
|
kosa
New Member
Posts: 7
|
Post by kosa on Apr 11, 2020 21:08:56 GMT
I have the same request, I tried but unfortunately it does not work, closing with remote control or closing with the interior button on the dashboard, it works just opening
|
|
jingo
Junior Member
Posts: 62
|
Post by jingo on Apr 11, 2020 21:33:57 GMT
which one I should check because the different sentences ibb.co/1mvCHGX |
|
