Long Coding Advice for Passat B8 Dashboard Control Module 17

new

« Prev
1
Next »

free2beee
New Member

Posts: 12

Long Coding Advice for Passat B8 Dashboard Control Module 17 Apr 6, 2020 2:39:30 GMT tingel likes this

Quote

Post by free2beee on Apr 6, 2020 2:39:30 GMT

Hi everyone, thanks in advance to anyone who is able to assist,
On an auto scan of my car I found that the message "Control Module Incorrectly coded", see below:

Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 3G0 920 751 A HW: 3G0 920 751 A
Component: KOMBI 301 6421
Coding: 27A401186798000801887B0B1000000000000000
Shop #: WSC 04174 123 61029
ASAM Dataset: EV_DashBoardVDDMQBAB 009046
ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
VCID: 2313E9B0AB5FE2EFF47-8076

2 Faults Found:
13636608 - Control Module Incorrectly Coded
U1014 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 251
Mileage: 83672 km
Date: 2020.03.29
Time: 13:35:54

16776980 - Databus
U1121 00 [009] - Missing Message
[PLA_Status_01 keine Kommunikation]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 251
Mileage: 83672 km
Date: 2020.03.29
Time: 13:35:54

QUESTION: Is it safe to change the Long Coding Manually for this module back to the original pre-fault coding by changing the two different byte codes in the following?:

Original with No Faults in Instruments Control Module 17
LONG CODING:
27 A4 01 18 67 88 00 08 01 88 6B 0B 10 00 00 00 00 00 00 00

88 Byte 5 10001000

6B Byte 10 01101011

Current with two faults as shown above and a different coding for the two items above.

LONG CODING
27 A4 01 18 67 98 00 08 01 88 7B 0B 10 00 00 00 00 00 00 00

98 Byte 5 10011000

7B Byte 10 01111011

vilsa72 New Member Posts: 5	Long Coding Advice for Passat B8 Dashboard Control Module 17 Apr 7, 2020 9:25:57 GMT free2beee likes this Quote Select Post Deselect Post Link to Post Back to Top Post by vilsa72 on Apr 7, 2020 9:25:57 GMT Hi, Yes, that's no problem. You can change manually or can use Hex to Binary converter. Regards Saulius
	Last Edit: Apr 7, 2020 9:28:10 GMT by vilsa72

free2beee New Member Posts: 12	Long Coding Advice for Passat B8 Dashboard Control Module 17 Apr 8, 2020 5:33:47 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by free2beee on Apr 8, 2020 5:33:47 GMT Thanks I will have a go and report back.

free2beee
New Member

Posts: 12

Long Coding Advice for Passat B8 Dashboard Control Module 17 Apr 25, 2020 2:07:25 GMT

Quote

Post by free2beee on Apr 25, 2020 2:07:25 GMT

Hello, I received advice from Kufatec directly about this issue, it has now been RESOLVED. Byte 13 Bit 0 must be activated in Module 17,

Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 3G0 920 751 A HW: 3G0 920 751 A
Component: KOMBI 301 6421
Coding: 27A401186788000801886B0B1001000000000000
Shop #: WSC 04174 123 61029
ASAM Dataset: EV_DashBoardVDDMQBAB 009046
ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
VCID: 2313E9B0AB5FE2E36E0-8076

No fault code found.

ciberboy
New Member

Posts: 1

Long Coding Advice for Passat B8 Dashboard Control Module 17 Apr 8, 2023 14:43:17 GMT via mobile

Quote

Post by ciberboy on Apr 8, 2023 14:43:17 GMT

Apr 7, 2020 9:25:57 GMT vilsa72 said:

Hi,

Yes, that's no problem. You can change manually or can use Hex to Binary converter.
Regards
Saulius

Any chance you could send me an email to ciberboynuno@gmail.com? I have a question about a Passat that I believe you previously owned. Is it ok for you?

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

Long Coding Advice for Passat B8 Dashboard Control Module 17

Post by free2beee on Apr 6, 2020 2:39:30 GMT

Post by vilsa72 on Apr 7, 2020 9:25:57 GMT

Post by free2beee on Apr 8, 2020 5:33:47 GMT

Post by free2beee on Apr 25, 2020 2:07:25 GMT

Post by ciberboy on Apr 8, 2023 14:43:17 GMT

Shoutbox