|
|
Post by quattruxa on Mar 8, 2020 20:04:38 GMT
Did anyone know how to do this on Tiguan 1.5 tsi.  |
|
|
|
Post by davide on Mar 30, 2020 19:58:11 GMT
Modifica mappatura pedale acceleratore:
Module 44 - Steering Assistence
Security access - 19249
Adaptation
Submenu - Driving profile switchover:
- A Incremental, controlled by time (Default)
-B Direct, controlled over threshold value
|
|
|
|
Post by 4esterby on Apr 1, 2020 1:53:15 GMT
Has anyone tried it on 1.5 TSI?
|
|
|
|
Post by davide on Apr 7, 2020 20:57:33 GMT
umento reattività motore impostandolo su Audi
Module 01 Engine
Security access -> 27971
Long coding - Byte 00
Audi
-> Bit 0 Not active
-> Bit 1 Active
-> Bit 2 Not active
Seat/Skoda/VW (Default)
-> Bit 0 Active
-> Bit 1 Not active
-> Bit 2 Not active
ATTENZIONE: sulle 1.5 TSI l'incremento è stato confermato da vari utenti, altri utenti riscontrano errore
nel modulo 03 Brakes.
|
|
a1ek
New Member
Posts: 1
|
Post by a1ek on May 24, 2020 9:43:10 GMT
Has anyone tried it on 1.5 TSI? I've tried several times on my Golf MK7.5 1.5 TSI DSG from late 2019 but with no luck. Both with long coding described by Davide and others as well as with App "Increase engine response" set to Audi. I always get "31. Function not available" error. Dynamic steering assist setting works for me though (but the difference in steering is barely noticeable). |
|
|
|
Post by ciprian123 on Jul 30, 2020 16:48:46 GMT
Hy, I made the throtle change on my passat 1.5 tsi MT6 an it works fine, pedal reapons, rev maching and steering much better, also the lunch from zero improvez,
But I tried to do the coding change to Audi in Engine module and every time I get the error 31.
In my default setup I heve only the Bit00 (Hex01) selected and tried to change to Bit 01 with no succes, please help. What other Bit must be selected to do the Audi mode.
|
|
