|
|
Post by truesavage on Mar 8, 2020 9:26:26 GMT
Hi all, I would like to make these changes but not sure how. Any ideas ? 1. Disable start/stop (12V adjust did not work)2. Disable autolock when car is moving (SOLVED)3. Enable autolock when keys are outside range
I got the next gen. Thanx for any/all help. |
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Mar 8, 2020 9:39:06 GMT
1. Disable start/stop
Have you tried the voltage coding?
Module Gateway (19)
-Adaption
--Start/stop start voltage limit change it to 12V
-----
2. Disable autlock when car is moving
Check car settings in the infotainment system -> Open and close setting -> should be "Lock automatically" or something similar and you untick that box.
if you dont have that option...
Try this
Go to Module 09 - Central Electrics
-Adaption
-- ZV Autolock or Access Control
--- Menuesteuerung ZV Autolock-Unlock change it to "adjustable"
Press and hold green tick
it might ask for security code, enter 31347
Now you should have the menu option I spoke of earlier.
|
|
|
|
Post by truesavage on Mar 8, 2020 11:25:30 GMT
1. Disable start/stopHave you tried the voltage coding? Module Gateway (19) -Adaption --Start/stop start voltage limit change it to 12V ----- 2. Disable autlock when car is movingCheck car settings in the infotainment system -> Open and close setting -> should be "Lock automatically" or something similar and you untick that box. if that ^ doesnt work try below. Try this Go to Module 09 - Central Electrics -Adaption -- ZV Autolock or Access Control--- Menuesteuerung ZV Autolock-Unlock change it to "adjustable" Press and hold green tick it might ask for security code, enter 31347 Now you should have the menu option I spoke of earlier Hi,
Thanks for the quick reply. 1. did not work for me but 2. Works like a charm.
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Mar 8, 2020 16:34:30 GMT
I am glad atleast one of the mods worked. I hope someone else can help you with the rest
|
|
|
|
Post by lrnzgti on Mar 18, 2020 21:14:40 GMT
For the start and stop functionality try 12.1 and 12.6 and check if it works.
For the exhaust flaps there's nothing you can do since the polo gti has no flaps whatsoever. You can just set the soundaktor volume level from 0 to 100%
|
|
|
|
Post by truesavage on Apr 1, 2020 7:20:24 GMT
For the start and stop functionality try 12.1 and 12.6 and check if it works. For the exhaust flaps there's nothing you can do since the polo gti has no flaps whatsoever. You can just set the soundaktor volume level from 0 to 100% Hi, What are we actually doing when we change the the voltage to 12v 12.1v or 12.6v ? How is that disabling the start stop exactly ? Thanks for the info on flaps. I was misinformed on this one. Deleted from the first post. Soundaktor is set to 0% via the one touch app. No need for that bullshit  |
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Apr 1, 2020 9:40:13 GMT
Correct me if I am wrong. when you change the voltage you trick the car into thinking there is "lots" of power drawing for example if you have the fan speed set to high.
if the power draw is high then start/stop wont activate because it wont be able to supply whatever it is that is drawing that much.
|
|
