|
|
Post by furkan on Mar 6, 2020 8:43:41 GMT
Has anyone done a coding with drl light signal at the same time?
|
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 12:07:26 GMT
Central Electric (unit 09), long coding:
Byte 23 (hex 70):
DRL when indicating (turn signal) [Bit 6] -> Stay ON / Switched OFF
|
|
|
|
Post by furkan on Mar 6, 2020 14:21:48 GMT
Central Electric (unit 09), long coding:
Byte 23 (hex 70):
DRL when indicating (turn signal) [Bit 6] -> Stay ON / Switched OFF bit 6 you mentioned here is open but bit 7 is open but i couldn't open it at the same time. Can you show me how to enter values here (swicthed off-stay on-) |
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 14:33:13 GMT
With me with H4 and ordinary DRL bulbs it works.  |
|
|
|
Post by furkan on Mar 6, 2020 15:15:29 GMT
With me with H4 and ordinary DRL bulbs it works. Are you using switched off? |
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 15:21:03 GMT
I use Stay ON for every day using.
But I tested it. When I changed to Switched OFF, the left or right DRL light was switched off when the left/right turn signal is activated.
|
|
|
|
Post by furkan on Mar 6, 2020 15:36:47 GMT
I use Stay ON for every day using. But I tested it. When I changed to Switched OFF, the left or right DRL light was switched off when the left/right turn signal is activated. Thanks. Is there anything burning the daytime running lights when it makes the selector? |
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 15:42:39 GMT
I use Stay ON for every day using. But I tested it. When I changed to Switched OFF, the left or right DRL light was switched off when the left/right turn signal is activated. Thanks. Is there anything burning the daytime running lights when it makes the selector? I think that this ordinary light bulb from the DRL (P21W) will not burn out faster. I've looked at the regulations and you can run it if the DRL from the turn signal is 40 mm or less. |
|
