|
|
Post by furkan on Mar 6, 2020 5:37:38 GMT
How can I open Leaving home coming home low beam? My vehicle does not have a headlight and rain sensor. Does anyone activate such a feature?
|
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 11:59:06 GMT
Central Electric (unit 09), long coding: Byte 13 (hex 2B):
Coming/Leaving home variant (Bit 6) -> Low beam Byte 10 (hex 09):
Leaving home (Bit 1) -> Active Coming home (Bit 2) -> Active forum.obdeleven.com/post/199 |
|
|
|
Post by furkan on Mar 6, 2020 14:13:20 GMT
Central Electric (unit 09), long coding: Byte 13 (hex 2B):
Coming/Leaving home variant (Bit 6) -> Low beam Byte 10 (hex 09):
Leaving home (Bit 1) -> Active Coming home (Bit 2) -> Active forum.obdeleven.com/post/199These items are clear but didn't work. Ch / Lh says 30 seconds of auto-lock must be off for it to work. Let me see that I will open this item at that time. |
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 14:22:21 GMT
Indeed, the activation itself does not work. I checked it with my T6. And the 30-second way works?
|
|
|
|
Post by furkan on Mar 6, 2020 15:07:41 GMT
Indeed, the activation itself does not work. I checked it with my T6. And the 30-second way works? First of all I have to say that my car does not have an auto position in the headlight switch. (I understand what you're saying for switched off) this 30 second locking bit is located at 4 bytes 5. Is this feature on in your car? If I turn off this byte 5, will leaving and coming home be active? because I opened all the items to open but it doesn't work. |
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 6, 2020 15:14:44 GMT
I don't have an auto position in the headlight switch either. What I have on the screenshot below is active and then leaving/coming does not work.  |
|
|
|
Post by furkan on Mar 6, 2020 15:38:46 GMT
I don't have an auto position in the headlight switch either. What I have on the screenshot below is active and then leaving/coming does not work. Thanks. i am will try |
|
|
|
Post by furkan on Mar 7, 2020 19:18:34 GMT
I don't have an auto position in the headlight switch either. What I have on the screenshot below is active and then leaving/coming does not work. auto shut down after 30 seconds and coming home is running. But When I opened the door and made high beam, low beam headlights turned on. It does not work when leaving home and on and off from the key. I think the auto headlight switch is required. |
|
tomkasz
Closed beta tester
Posts: 31
|
Post by tomkasz on Mar 7, 2020 19:26:36 GMT
I don't have an auto position in the headlight switch either. What I have on the screenshot below is active and then leaving/coming does not work. auto shut down after 30 seconds and coming home is running. But When I opened the door and made high beam, low beam headlights turned on. It does not work when leaving home and on and off from the key. I think the auto headlight switch is required. I guess that's how it works without that switch. I found something about it in this forum, but in the section about VW Golf. |
|
|
|
Post by furkan on Mar 7, 2020 20:09:56 GMT
auto shut down after 30 seconds and coming home is running. But When I opened the door and made high beam, low beam headlights turned on. It does not work when leaving home and on and off from the key. I think the auto headlight switch is required. I guess that's how it works without that switch. I found something about it in this forum, but in the section about VW Golf. Yes, the key is required. I looked at most places and every car has an auto location. I think the features are very limited in these vehicles. but i find it enough. |
|
