|
|
Post by microcens on May 15, 2022 18:30:37 GMT
Hello to everyone, i have installed after market footwell lights and I'm looking for the correct coding. I've managed to light them on but the dimmer in the MIB is not working. This is the code that i used... Central Electronics 09 Adaptation Ambient Lightning Fussraumbeleuchtung - Switch to Installed Come back Leuchte33AMBL 3C72 Type_Of_Load_33 - Switch to LED Kleinleistung ohne Open Load Diagnose Lampendefektbit_position_33- Leave 0 Fehlerort_mittleres_Byte_DTC-DFCC_33 = 2 Light_Funcion_A - Switch to Fussraumlicht Dimming_AB_33 - Choose intensity from 1 to 127 Light_Control_HD_AB_33 - Switch to Always The lights are connected to the BCM, PIN 72 Try Adaptation → Ambient lighting - Defaultwert Ambienteprofil Fussraum → 100% |
|
macb
New Member
Posts: 1
|
Post by macb on May 22, 2022 20:59:44 GMT
Hi,
I have parktronic and camera, but if I press the button when I want to check distant between my car and car behind me only parktronic are working (cam not). Camera with parktronic works only when I drive reverse gear. Is it possible to adaptive this button to turns on camera too? How can I adaptive it using OBD11?
|
|
|
|
Post by quemasda59 on Dec 7, 2022 8:36:21 GMT
Has anyone tried to disable START&STOP with obdeleven. In the karoq apparently it works, but I have doubts in the Kamiq. They have not yet delivered my Kamiq sport for which reason I could not test it.😉
|
|
|
|
Post by etaiharari on Dec 16, 2022 11:21:17 GMT
Is there way to active code that will give us option to know the oil level?
|
|
Ohara
New Member
Posts: 22
|
Post by Ohara on Dec 19, 2022 22:58:56 GMT
Nops no software solution.
|
|
|
|
Post by javierpm on Mar 3, 2023 17:53:50 GMT
Hi! I am new is this forum.
I have a Kamiq Ambition with lane assist and front assist so I tried to activate the traffic assist through OBDeleven long code with no success.
The device do not recognize module A5 as it does not exist. I tried paying 100 credits and it warn me that there was no connection with that module.
Anyone know where the problem can be or how to activate this module?
Many thanks
|
|
|
|
Post by aaaaplay on Mar 31, 2023 0:14:07 GMT
Welcome! Can I clarify what you were trying to activate? You wrote 'traffic assist' but do you mean Traffic Jam Assist, Travel Assist, or Adaptive Lane Guidance? If you mean, Traffic Jam Assist where the cruise control brings you to a stop and then takes off again, that should be enabled by default if you have Adaptive Cruise Control from factory. Travel Assist combines lane-keep assist, adaptive cruise control, traffic sign recognition (market dependant) and Traffic Jam Assist to control the accelerator, brakes and steering.  Adaptive Lane Guidance (Early)/Lane Assist with Early option is an enhanced version of Lane Assist that other manufactures would describe as 'Lane centering'. It mitigates the 'ping-pong' effect of bouncing between the lines, entering it and pulling the car around corners. By enabling Adaptive Lane Guidance (Early) you can achieve the same result as Travel Assist but it doesn't require a capacitive touch steering wheel for 'Hands-on detect'. Instead you can use the non-capacitive touch steering wheel and the car tracks the movement of the steering wheel rather than the touch of your hands on the wheel. The drawback to Adaptive Lane Guidance you must keep inputting minor movements or the system will ask you to put your hands back on the wheel. Whereas Travel Assist just asks you to touch the steering wheel. If you're trying to enable Travel Assist without a capacitive touch steering wheel then it will error and not work (I have tried myself). If you have the older style steering wheel from 2020 or earlier then you definitely don't have it. Otherwise, it can be identified by the fourth button on the left side set of steering wheel controls. The fourth button is basically a shortcut button to turn off early intervention with Lane Assist. Otherwise to turn it on and off you need to go into driver assistance settings in the infotainment system. Without Hands-On Detect/Incompatible with Travel Assist With Hands-On Detect/Compatible with Travel Assist If you want Travel Assist but you don't have the hands-on detect steering wheel, then you can retrofit it. After fitting the new steering wheel, you will then need to change the Capacitive_steering_wheel setting from not_installed to installed in Module 13/Adaptive Cruise Control. Along with enabling Travel Assist. However, it is well known that Skoda is struggling to fix the issues around Travel Assist. They've tried replacing steering wheel and updating software but cars are still developing errors after a few months. I would also beware of used steering wheels on eBay - these could have been removed from vehicles with issues. While not a tested, owners with Travel Assist errors theoretically could disable Travel Assist, change the capacitive_steering_wheel option to not_installed and enable the early option for Lane Assist until Skoda fixes the issue. |
|
|
|
Post by stefflimitless on Apr 18, 2023 6:55:30 GMT
New coding: SAFE EXIT
In this coding, the left or right Brake Light will light up when opening driver or passenger door. Scala and Kamiq don’t have exit lights in front doors.
09 Central electrics->
Adaptations->
Leuchte20BR LA70->
Light Function D20->
Set to: Tuer ausstiegslicht vorne links
Dimming CD20: Set to 127
Dimming direction CD20: Set to Maximize
Leuchte21BR RC8->
Light Function D21->
Set to: Tuer ausstiegslicht vorne rechts
Dimming CD21: Set to 127
Dimming direction CD21: Set to Maximize
When CD or EF is already in use, depending on previous codings, use any free slot. Beware: AB Section is Master, so has highest priority.
It makes no sense to ask obd11 for building App for that. It will overwrite your existing modified codings.
This coding was made on full LED backlights, so the Name of the Brake Light could vary.
|
|
|
|
Post by wooly4228 on Nov 17, 2023 14:25:30 GMT
Is there way to active code that will give us option to know the oil level? Hello There is a button in central console with a A marked on it. This switches the start/stop. Only problem is you have to do it every time you start the car. It will show in dashboard wether on or off |
|
pla87
Closed beta tester
Posts: 2
|
Post by pla87 on Dec 28, 2023 13:56:47 GMT
New coding: SAFE EXIT In this coding, the left or right Brake Light will light up when opening driver or passenger door. Scala and Kamiq don’t have exit lights in front doors. 09 Central electrics-> Adaptations-> Leuchte20BR LA70-> Light Function D20-> Set to: Tuer ausstiegslicht vorne links Dimming CD20: Set to 127 Dimming direction CD20: Set to Maximize Leuchte21BR RC8-> Light Function D21-> Set to: Tuer ausstiegslicht vorne rechts Dimming CD21: Set to 127 Dimming direction CD21: Set to Maximize When CD or EF is already in use, depending on previous codings, use any free slot. Beware: AB Section is Master, so has highest priority. It makes no sense to ask obd11 for building App for that. It will overwrite your existing modified codings. This coding was made on full LED backlights, so the Name of the Brake Light could vary. I have D already set for another coding. In this case Is It ok to set light function E and dimming EF? I have also F not Active. Could be an issue if i set E? |
|
|
|
Post by stefflimitless on Jan 2, 2024 19:09:22 GMT
When E andF is not already used, should be no problem. When one of those is already in use, the dimming will affect this channel too. Dimming is always paired. On newer units they have already ABC DEF GHI. So dimming will affect 3 Channels.
|
|
|
|
Post by aussietig on Jan 13, 2024 22:21:25 GMT
NOT POSSIBLE Have spent several hours and without the AliExpress cable it is not doable
|
|
|
|
Post by aussietig on Jan 13, 2024 22:23:23 GMT
Yes open bonnet withdraw dipstick correct and reliable
|
|
|
|
Post by stefflimitless on Jan 16, 2024 19:15:19 GMT
NOT POSSIBLE Have spent several hours and without the AliExpress cable it is not doable What do you talking from? |
|
|
|
Post by refikbasket on Oct 23, 2024 7:36:43 GMT
is there a way of activating NAV in Skoda Kamiq 2021? right now it just says Function not available.
|
|
|
|
Post by stefflimitless on Oct 27, 2024 19:30:50 GMT
With OBD11 not. Even when the 5f unit support it. You have to ask the dealer. And they 99% will say it’s not meant for this car. When you have a LG Unit built, there is a chance when you search the web.
|
|
