oranx
New Member
Posts: 34
|
Post by oranx on Feb 15, 2020 20:05:30 GMT
Hi,
i figured out some options for Scala. Remember to always make backups.
GAUGE TEST CONTROL UNIT 17 – DASHBOARD
LONG CODING
STAGING – YES
LAP COUNTER CONTROL UNIT 17 – DASHBOARD
LONG CODING
LAP COUNTER – YES
SEATBELT WARNING CONTROL UNIT 17 – DASHBOARD
LONG CODING
SEAT BELT WARNING
VERSION 1 – EU
VERSION 2 – USA or you can turn it OFF
OFFROAD MENU CONTROL UNIT 5F – INFORMATION CONTROL UNIT 1
SECURITY CODE 31347
ADAPTATION
1.VEHICLE MENU OPERATION
menu_display_compass – activated
menu_display_compass_over_threshold_high
2.VEHICLE FUNCTION LIST BAP
compass_0x15 – active
RADIO RESET
AUTO LIGHT ASSIST
CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
FERNLICHT_ASSISTENT
MENUESTERUNG FERNLICHTASSISTEN – PRESENT
MENUESTERUNG FERNLICHTASSISTEN WERKSEINSTELLUNG – PRESENT
ERWEITERTE FERNLICHTASSISTEN – AFS, FLA, FERNLICHT UBER AFS
FERNLICHTASSISTEN RESET - ACTIVE
CONTROL UNIT A5 – FRONT SENSORS DRIVER ASSISTANCE SYSTEM
LONG CODING
BYTE 21 – BIT 5 RADIO RESET AND SEARCH FOR AN OPTION IN 'CAR - LIGHT ING MENU'
CLIMATRONIC AUTO FAN SPEED CONTROL UNIT 08 – AIR CONDITIONING
LONG CODING
BLOWER DISPLAY IN AUTO OPERATION – ACTIVATED
CAR OPENING / CLOSING SOUND WITH OPTION IN MENU
CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
ACKNOWLEDGEMNT SIGNALS AKUSTICHE_RUECKMELDUNG_ENTRIEGELN – ACTIVE
AKUSTICHE_RUECKMELDUNG_VERRIEGELN – ACTIVE
MENUESTEUERUNG_AKUSTICHE-RUECKMELDUNG – ACTIVE
IF YOU STILL DONT HAVE SOUND, JUST ACTIVATE
Acoustische-Rueckemldung_signalhorn to ACTIVE
MENU "DRIVER SCHOOL" CONTROL UNIT 5F – INFORMATION CONTROL UNIT 1
ADAPTATION
VEHICLE MENU OPERATION
MENU_DISPLAY_DRIVING_SCHOOL – ACTIVATED
RADIO RESTART
SCANDINAVIAN DRL CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
AUSSENLICH_FRONT
SUB – TAGFAHRLICHT DAUERFAHRLICHT AKTIVIERT ZUSAETZLICH STANDLICHT
ACTIVATED lub ON
SMOOTH DIMMING / BRIGHTENING LIGHTING ON HIGH BOARDS
Distribution CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
SUCHBELECHTUNG_ALLGEMEIN
KL58 EINSCHALTEN MIT RAMPE – ACTIVE
AMOUNT OF FUEL FOR FULL REFUELING CONTROL UNIT 17 – DASH BOARD
LONG CODING
Byte 10 - Bit 4 Activate
BLINKER AMOUNT
CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
AUSSENLICHT_BLINKER
KOMFORTBLINKEN_BLINKZYKLEN
from 1 to 5 blinks (3 – STANDARD)
SWITCHING OFF THE DAYLIGHT LIGHTS AFTER HANDBRAKING
CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
AUSSENLICH_FRONT
Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten
active [standard: not active]
I will add coding for Cornering lights from Halogen for non LED cars shortly.
If You will see any problem, just write it down here.
Greeting, Patryk.
|
|
|
Post by blututh on Feb 20, 2020 6:23:19 GMT
Thank you Patryk for sharing!
One question, do you maybe know if and how can you activate the hill hold assist?
|
|
oranx
New Member
Posts: 34
|
Post by oranx on Feb 21, 2020 19:32:25 GMT
Thank you Patryk for sharing! One question, do you maybe know if and how can you activate the hill hold assist? Its an ABS settings whitch i dont want do Mode when car has manufacturer warranty. I had figured out New features, Adaptive Lane Tracking. I Will ad it soon to the coding list
|
|
aterm
New Member
Posts: 1
|
Post by aterm on Feb 26, 2020 11:24:08 GMT
Thanks for sharing.
A question, is possible to activate the traffic sign? I tried witch in Kamiq Ambition witchout amundsen but don't worker for me.
|
|
|
Post by face0704 on Apr 19, 2020 12:47:36 GMT
OFFROAD MENU CONTROL UNIT 5F – INFORMATION CONTROL UNIT 1
SECURITY CODE 31347
ADAPTATION
1.VEHICLE MENU OPERATION
menu_display_compass – activated
menu_display_compass_over_threshold_high
2.VEHICLE FUNCTION LIST BAP
compass_0x15 – active
RADIO RESET
Cant add this coding to my kamiq.
|
|
|
Post by peta2020 on Aug 21, 2020 17:43:48 GMT
I have started this thread to share with you a recent discovery of mine. All of you probably know that all the Scalas and Kamiqs are equipped with Lane assist systems (even the entry level ones). Although this system is usually very helpful, it is a bit annoying that once it is turned off in maxidot menu - assistance systems, it turns back on upon cycling a key. However this is the coding that prevents this from happening: -> Control Unit A5 - Driver Assistance -> select Long coding -> change setting Perso_HC from Activated to Last_setting (changes bit 2&3 of byte 14) -> press the magical green button to save the changes tip: in case you get the error when saving -> (31) function not available, change the mode to vw - diagnostic mode, and try again (even if you are already using this mode, just reselect it again) Once activated, the car will remember the last state of Lane assist (on or off) upon cycling the key. Hope some of you find the information above useful.
|
|
|
Post by Car Code on Dec 20, 2020 18:58:24 GMT
Did you go in skoda dealership since You've done this? They said to me when I was buying my car and asking them to do this that it will void warranty. Did they detect that change if You were visiting them?
|
|
oranx
New Member
Posts: 34
|
Post by oranx on Dec 21, 2020 11:23:45 GMT
In my opinion they can only check this by connecting to the car's computer. If nothing happens in the car and they will not start to dig it, I think there is nothing to worry about.
|
|
|
Post by mjgriffo on Dec 23, 2020 1:58:34 GMT
Hey all,
Has anyone worked out how to activate kerb mirror dipping if it's not in the lighting and mirrors menu?
TIA
|
|
|
Post by selahattin on Dec 31, 2020 9:38:56 GMT
When activating a retrofit rear view cam, what kind of change needed at 5f module?
|
|
|
Post by LexLuthor on Feb 12, 2021 11:01:46 GMT
LIGH ASSIST FOR BASIC LED: KAMIQ/SCALA
Make a backup first!
CONTROL UNITS
CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
FERNLICHT_ASSISTENT
EXPANDED HIGH BEAM CONTROL -> HALOGEN HIGH BEAM ASSIST (yes, Kamiq has LED high beam, it doesn't matter) MENUESTERUNG FERNLICHTASSISTEN –> PRESENT FERNLICHTASSISTEN RESET -> ACTIVE MENUESTERUNG FERNLICHTASSISTEN WERKSEINSTELLUNG –> PRESENT FERNLICHTASSISTEN_ZETVERZOEGENERUNGSWERT - 800 ms (keep the value)
Next
CONTROL UNIT A5 – DRIVER ASSISTANCE
LONG CODING AFS_CODING_LIGHT_ASSIST –> HIGH_BEAM_ASSIST
Reset multimedia unit (push the power button over 10 seconds to restart the unit)
Activate the Light Assist in Light Settings (multimedia unit)
Push the high beam lever to activate the Light Assist (high beam icon with A). To turn it off push and pull the lever or change the option in settings.
|
|
|
Post by sonybgt100 on Feb 13, 2021 21:40:57 GMT
If anyone can help with the coding of Hill Assist activation I will be grateful😊😊
|
|
|
Post by scalastyle on Mar 5, 2021 22:06:01 GMT
sonybgt100You can go to Scala thread and there is hill holder activation metod. Just be carefull if your Kamiq supports it.
|
|
gpav
New Member
Posts: 26
|
Post by gpav on Mar 17, 2021 8:29:31 GMT
If anyone can help with the coding of Hill Assist activation I will be grateful😊😊 if it works to your kamiq please post in that thread, i am also interested. most possibly it will work, and hope the obd11 team soon has ready the one-click app for hill assist
|
|
|
Post by armandos on Apr 2, 2021 9:00:25 GMT
Inglese translated
Hi, I just bought obv11 and with the instructions on the app I can't code the adaptive lane assist in my Kamiq 2021, where am I wrong?
|
|
|
Post by mickydk on Apr 2, 2021 18:13:35 GMT
I myself am new Skoda kamiq owner soon in about 3 weeks. I do not know anything about long coding or obdeleven but I would like to learn it. I have seen on another page that lane assist should be possible to code Look at Carscanner
|
|
|
Post by modcar on Apr 15, 2021 21:30:47 GMT
Hello !
Anybody know how to activate adaptive lane assist (adaptive lane tracking)? I already tried the logn coding from skoda scala section (i have posted it below) and it did not work. (Setting appeared on menu for adaptive lane assist but I couldn't tick it to turn it on).
Adaptive lane assist
Module A5
Long Coding
Point of intervention
Set to: Early (via menu) (Standard = late) but I couldn't tick it to turn it on).
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Apr 17, 2021 21:24:37 GMT
... I had figured out New features, Adaptive Lane Tracking. I Will ad it soon to the coding list Dear Patryk, Thank you for sharing coding and adaptations. I am trying to activate adaptive lane tracking (assist) on my Kamiq 1.6 TDI Ambition DSG MY2021. So far i have gone through this long coding on Control Unit A5: POINT OF INTERVENTION -> early_setting_via_menu (enable adaptive lane assist) CONFIGURATION_FOR_LANE_DEPARTURE_WARNING_KL15 -> last_setting (enable lane assist power status memory) HC_WARN_INTENSITY -> setting_over_menu (enable lane assist warning intensity MIB setting) Everything seems good on menu for lane assist, i can find setting to activate/deactivate lane assist(as before long coding) and to activate/deactivate adaptive lane assist + chose level of warning intensity (which appeared after long coding). The problem is that i can't activate adaptive lane assist. It is there on lane assist menu but once i press on it, it's not getting checked. The only way i found out it can be checked is when i turn on ignition, if i rush to lane assist menu and checked it, is activated for 2-3 secs. Then after these 2-3 secs it is unchecked automatically(deactivated). You can Find attached my A5 unit info and A5 unit long code with the 3 changes above activated. I would appreciate your effort to find out what's going on! Thank you in advance! Greetings, Nikos
|
|
|
Post by aussietig on Apr 20, 2021 1:23:47 GMT
Did you use the security code before doing anything as if you didnt it wont let you register what you have tried to do
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Apr 20, 2021 8:52:52 GMT
Thank you for your replry.
Yes i did use the security code, also tried with open hood.
I dont think thath the problem is about resitering long code or adaptations because i show the ''green'' mesagge on phone application about acepting or saving the codes or something like that... with the green back round.
After all, adaptive lane assist appear on menu, the deal is that i can't check it.
|
|
|
Post by LexLuthor on Apr 20, 2021 12:57:09 GMT
In my case, I've a hardware 3Q0980654A with software 0920 and I've coded the ALA. Not works so well (bouncing from lane to lane) but works. Just changed POINT OF INTERVENTION -> early_setting_via_menu I wouldn't be surprised if MY2021 need a swap code to activate some features like this one.
|
|
|
Post by aussietig on Aug 18, 2021 7:52:23 GMT
I have started this thread to share with you a recent discovery of mine. All of you probably know that all the Scalas and Kamiqs are equipped with Lane assist systems (even the entry level ones). Although this system is usually very helpful, it is a bit annoying that once it is turned off in maxidot menu - assistance systems, it turns back on upon cycling a key. However this is the coding that prevents this from happening: -> Control Unit A5 - Driver Assistance -> select Long coding -> change setting Perso_HC from Activated to Last_setting (changes bit 2&3 of byte 14) -> press the magical green button to save the changes tip: in case you get the error when saving -> (31) function not available, change the mode to vw - diagnostic mode, and try again (even if you are already using this mode, just reselect it again) Once activated, the car will remember the last state of Lane assist (on or off) upon cycling the key. Hope some of you find the information above useful. If you get an error 31 when coding do this. Turn app off On your phone go to settings/ apps/ Obdeleven. click on it/cache and down bottom click on clear cache and all will be good again..
Been there worked that out.
|
|
|
Post by aussietig on Aug 24, 2021 10:23:20 GMT
When activating a retrofit rear view cam, what kind of change needed at 5f module? Can't be done as car doesn't have memory to do it Tried and can't be done
|
|
|
Post by philpag on Oct 27, 2021 16:18:06 GMT
Hello everybody, no news for odbeleven with MY2022 ? I bought a Kamiq model 2022 and my odbeleven cannot work..............
|
|
|
Post by philpag on Oct 27, 2021 16:19:36 GMT
|
|
|
Post by Volvic on Jan 15, 2022 21:10:16 GMT
Save air conditioning last setting Control unit 08 - Air Conditioning Long coding Store re circulation air setting for terminal 15 off Original: Service life dependant- store Change to: Save
|
|
|
Post by microcens on Feb 17, 2022 8:47:22 GMT
On my kamiq my2021 offroad menu only shows the wheel. ....
|
|
|
Post by toumbano on Feb 17, 2022 9:04:19 GMT
Hello to everyone, i have installed after market footwell lights and I'm looking for the correct coding. I've managed to light them on but the dimmer in the MIB is not working. This is the code that i used...
Central Electronics 09
Adaptation
Ambient Lightning
Fussraumbeleuchtung - Switch to Installed
Come back
Leuchte33AMBL 3C72
Type_Of_Load_33 - Switch to LED Kleinleistung ohne Open Load Diagnose
Lampendefektbit_position_33- Leave 0
Fehlerort_mittleres_Byte_DTC-DFCC_33 = 2
Light_Funcion_A - Switch to Fussraumlicht
Dimming_AB_33 - Choose intensity from 1 to 127
Light_Control_HD_AB_33 - Switch to Always
The lights are connected to the BCM, PIN 72
|
|
|
Post by rugpull on Apr 13, 2022 9:38:35 GMT
i am trying to enable the airconditioner functions on my infotainment system as shown here:
Any pointers? Can't find anything online except this video.
|
|
|
Post by tecreasey on Apr 27, 2022 17:06:39 GMT
Hello,
New to the forum. Is it possible to activate the rain sensors on a Kamiq Monte Carlo 2022?
I have a light sensor for the headlights and the dealer has unofficially suggested that it might be possible to active the rain sensor away from the dealer.
|
|