|
|
Post by gianry on Feb 8, 2020 18:58:03 GMT
Hi,
I’ve just fitted the tpms system on my golf .
I’ve coded gateway , dashboard and multimedia .
The pressure value are correct and visible on principal cluster and on discover pro but when I try to change parameter from comfort to high load I receive the message “ function not available now “
Is it a coding issue ? Or other ?
Thanks
|
|
|
|
Post by ofektal8 on Feb 8, 2020 19:53:19 GMT
|
|
|
|
Post by gianry on Feb 8, 2020 20:03:12 GMT
I’ve followed the xagico guide , which parameters could be loaded ?.., is it possible to have the file to upload with Odis ?
|
|
|
|
Post by ofektal8 on Feb 8, 2020 21:34:33 GMT
|
|
|
|
Post by gianry on Feb 9, 2020 18:41:34 GMT
I've loaded the xml file with parameters ; all works well now.
thanks
|
|
|
|
Post by gianry on Jun 11, 2020 8:27:27 GMT
Hi,
I've noticed twice in the last 15 days the message " tpms function not available now" and yellow light in dashboard.
Is it an hardware failure of the receiver or some wheel sensor?
thanks
|
|
|
|
Post by ofektal8 on Jun 13, 2020 20:18:59 GMT
Hi, I've noticed twice in the last 15 days the message " tpms function not available now" and yellow light in dashboard. Is it an hardware failure of the receiver or some wheel sensor? thanks Any fault codes? |
|
|
|
Post by gianry on Jun 14, 2020 12:17:40 GMT
I’ve not verified .. I ve sold the obd eleven old version. I ve to buy the seo nd gen version
|
|
libar
New Member
Posts: 1
|
Post by libar on Feb 4, 2021 18:48:00 GMT
Hello Gianry. I’m french so sorry for my English
I do the retrofit TPMS direct.
I have the same problem I think you. I have the pressure on the cluster, but on my MIB2 it it marked “starting ..
I have a fault in 5F. It’s « 7175- Limited operation due to missing message. BAP-BAP function ID: 02 »
I have the same coding of Xagigo
|
|
|
|
Post by dazzquibs on Apr 10, 2021 17:02:49 GMT
Hi, im a bit late on this thread, have a T6.1 and have fitted bigger wheels and want my different pressures to the ones stated by the TPMS on the 5F. my control unit is
Address 65: Tire Pressure (J502) Labels: 3AA-907-273.clb
Part No SW: 5Q0 907 273 D HW: 5Q0 907 273
Component: RDKBERU30 H05 0010
Serial number: 30000000371525
ASAM Dataset: EV_RDKBERU30 006001
ROD: EV_RDKBERU30_VW41.rod
VCID: 3635274178C0138B99E-8062
No fault code found.
is the process of making my own settings the same as in this thread via the Generator then uploading via Odis ( can it be done on normal odis or only Odis E)
|
|
