|
Post by ericgtd on Feb 4, 2020 19:41:33 GMT
Hey, Problem with a Golf 7 GTD 2014 Who can help me, have been searching for a few evenings but cannot solve the problem. Since this week my DRL LED is no longer lit in combination with Xenon In the "0" position, but in "auto" the DRL goes out when xenon turns on. Have already tried many coding and also put it back without result. Greets Eric
|
|
|
Post by dv52 (Australia) on Feb 4, 2020 20:59:11 GMT
^^^^ try this:
Leuchte2SL VLB10-Lichtfunktion C 2 and Leuchte3SL VRB21-Lichtfunktion C 3 change to Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Don
|
|
|
Post by ericgtd on Feb 4, 2020 21:37:49 GMT
Hi Don, programmed as you wrote, but no result
|
|
|
Post by dv52 (Australia) on Feb 5, 2020 0:06:48 GMT
^^^ eric-OK, now stuff gets more complex because my suggestion should work. My suggestion uses the current Leuchte facility in your car for SSPLs (Single Sided Parking Lights). Please confirm that SSLP does indeed work on your car. My second observation is that the Leuchte-commands for "DRL wink" (where the DRL Lamp illumination decreases on the side of the car that the turn-signal operates) are oddly placed on your car. But DRL wink shouldn't interfere with my suggestion if the blinkers aren't operating Third suggestion is to check that the "Normal" version of Daytime running lights (there are two versions with the same name) is selected as shown in my picture below Don
|
|
|
Post by ericgtd on Feb 5, 2020 20:39:31 GMT
|
|