|
|
Post by minu94 on Feb 3, 2020 13:38:12 GMT
Hi guys,
I'm trying to access the adaptation in order to do the bleeding of the coolant circuit on a 2014 Seat Leon FR 2.0 TDI 184 CUPA engine. I guess it needs a security access code, because it doesn't let me do it. Any idea what is the code?
Thanks in advance!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 3, 2020 16:07:30 GMT
which adaptation are you trying to use.
|
|
|
|
Post by minu94 on Feb 7, 2020 9:15:35 GMT
In basic settings, the bleed coolant circuit one
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2020 12:03:34 GMT
For my info, what control unit is it on.
Normally if a security code is required then the security box will come up and show you a list of codes.
However in the control unit main screen if you select Security access it will show you all the know codes.
When you say it does not work, how are you trying to run it and do you get an error message showing not available.
|
|
onex
New Member
Posts: 3
|
Post by onex on Jun 16, 2020 12:45:44 GMT
Hi Guys  I am new here and now I just continue here because I also want to bleed my cooling system. My Car is a 2015 Leon 2.0 TDI 184HP CUNA Motor. I go to Engine electronics basic settings Bleeding the cooling circuit switch on then I get the message (13) Function not executable, message length or format wrong. please help me!! Onex  |
|
onex
New Member
Posts: 3
|
Post by onex on Jun 16, 2020 15:05:39 GMT
So now I've tried different things in the basic settings and get the same message everywhere see picture above
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 17, 2020 13:08:40 GMT
So now I've tried different things in the basic settings and get the same message everywhere see picture above Afraid I don't know the answer to this process but have you tried doing this under a different diagnostic session |
|
onex
New Member
Posts: 3
|
Post by onex on Jun 17, 2020 14:23:18 GMT
Yes, of course I've tried different sessions but without success.
In adaptations there is also an option to vent the cooling circuit.
I can activate it and it is also adopted.
But nothing changes, no pump starts or something.
That's why I came across the ventilation variant in the basic settings.
But here I always get this let's say error 13.
BTW Thank you for helping me
mfg
Onex
|
|
