Change Motor Reaction to Audi - Cupra Ateca

hey thx alot testeronline.

At the moment I got this:

So I guess the first step would be to uncheck Bit 0 to test it.

If you would select Seat VW (without applying), does it select Bit 0 and 1 aswell? or just Bit 0?

Brilliant

thank you so much testeronline.

So your original State was the same as mine. Perfekt.

Did you notice any major changes after changing it. I guess you need to turn the car completely off after, so that the changes take effect.

I hope I don't get the errors like with the Valves. But I think the problem could be that I don't see any security codes in the access list. Maybe I nee to enter them manually. (the software didn't ask for any yet)

again thank you so much testeronline

NESTi

I'll try the changes after lunch, i'll keep you guys updated.

I guess I have to try itt and find it out by myself.

But this awkward delay which you have sometimes when you kick down is quite annyoing.

it's like half a second of nothing and then full power.

I was wondering if this delay is the magical number between the 0-100km/h acceleration of the Audi SQ2 (4,8sec) and of the Cupra Ateca (5,2sec).

I wasn't able to test it yet, the dog didn't want me to do the programming, he prefered to take a long walk

So, I finally changed my car into Audi Mode.

I can't say that you notice half of a second. (+/-)

But I can definitely say that there is another feeling while driving. I don't know if there is also another throttle response when in Audi mode, but theres is definitely something which has changed. Time will say if these awkward downtimes are still occuring or not.

The Volume Replensih option is not working, I keep getting "---" on my screen.

The beeping of the trunk was working, but not directly over the adaption menu but in the submenu with the activation. There you find the Beep to turn on or off. I couldn't find the option where you change the remote behavior from long clicking to simple click to open or close the trunk.

NESTi

cool thanks alot.

but you can only set the 8 Bits together. Had a quick look, will google some more later.

I was reading some forums and watched some videos, there is a way to get the cruise control working again.

You need to change your brand to Audi while Audi Mode enabled.

the Motor reaction has nothing to do with your DSG timings.

I was changing the reaction time to audi, the pedal thingy to linear and the brand to audi.

I was feeling a slight increase in the reaction, BUT your cruise control will not increase/decrease by 1 anymore only by 10's.

If you are not changing to audi as brand you will get errors with the cruise control and the distance control.

I set it back to normal, except the linear pedal reaction. As I am driving alot with cruise & distance control I don't want it to have a malfunction in a critic situation.