|
|
Post by ponpon on Jan 28, 2020 9:40:01 GMT
Hello.
I don't know the coding program for 30 ambient colors.
Do you know anyone?
|
|
|
|
Post by vwjap on Jan 28, 2020 11:27:20 GMT
Same as 10 but add the RGB to colours 11-30
|
|
|
|
Post by ponpon on Jan 28, 2020 12:36:06 GMT
Thank you Only number 10 is displayed. Am I missing the item?  |
|
|
|
Post by vwjap on Jan 28, 2020 14:35:51 GMT
Well on my 2017 car the module doesn’t have 11-30 colours in the switches, and I think it was introduced later on in the year
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Jan 28, 2020 15:52:28 GMT
Colors 11 to 30 is under Central electrics -Adaption --Ambience_lightning_color_list_2From a 2019 May MK7.5 Sportwagen (No lightpack nor digital dashboard) Central Electrics Module: 5Q0937086 BQ  |
|
nype
New Member
Posts: 19
|
Post by nype on Jan 28, 2020 20:43:25 GMT
Does this only work on MK7.5 models, and not on MK7 models?
|
|
|
|
Post by vwjap on Jan 28, 2020 20:47:44 GMT
I have a early mk7.5 and the module only has 10 colours so I’d say mk7 wouldn’t have 11-30
|
|
moffe
New Member
Posts: 6 
|
Post by moffe on Jan 29, 2020 8:07:21 GMT
Same here... mk7.5 but only 10 colours. Not sure if this has been discussed here somewhere. But my bmc module does not have the lin pin. But do you guys know if I can solder the pin and it would work for adding color ambient leds to my Golf R? Saw that some guy fixing in Russia said that this could be possible... Or then I need to upgrade my BMC to a newer one. I have seen some skodas and some tiguans etc. that they have upgraded one color ambient system to multicolor. System description: BCM PQ37BOSCH Software number: 5Q0937086BG Software version: 0223 Hardware number: 5Q0937086BG Hardware version: 032 Serial number: 865803031701UE ODX name: EV_BodyContrModul1UDSBosc ODX version: 017002 Do you understand how you define the lin channels or addresses? I don't really understand, I guess one multicolor led has some predefined address in them or? And how should I get that information?  Pins for the leds are like this: Pin 1 = Terminal 30 Pin 2 = LIN Bus 5 Pin 3 = LIN Bus out to example next light Pin 4 = KL31 / GND (BCM LiN Bus Connector T73C / Pin 29) Here are some led modules for the footwell: Front LEDs 1x 8W0947415A 1x 8W0947415B Back LEDs 1x 8W0947415C 1x 8W0947415D Connectors 4x 8K0973754A Here is some information but this is the part I don't understand (activate the new adresses): If everything is connected, start coding the new RGB lights and activate the new adresses of them: It's RGB LIN-User #14 and must be activated as "undefined14". |
|
|
|
Post by kjellgs on Apr 8, 2020 12:39:17 GMT
Does anybody have the 30 color RGB codes?
|
|
|
|
Post by vwjap on Apr 8, 2020 12:44:45 GMT
You add the rgb codes to the Ambience_lightning_color_list_2 under adaptions in the 09 central electronics module, if you have the right module,
|
|
|
|
Post by kjellgs on Apr 9, 2020 6:55:49 GMT
You add the rgb codes to the Ambience_lightning_color_list_2 under adaptions in the 09 central electronics module, if you have the right module, Yes, I know, but I need the right RGB codes so I can get the right colors in the dashboard |
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Apr 9, 2020 12:41:26 GMT
^^ kjellgsBelow are "my" RGB values Attachments:
|
|
|
|
Post by kjellgs on Apr 9, 2020 17:30:45 GMT
^^ kjellgs Below are "my" RGB values Thanks, VIC! |
|
