|
|
1.1.5
Jan 24, 2020 13:05:18 GMT
Post by Thirsty on Jan 24, 2020 13:05:18 GMT
Use the following format to report bugs
Description of bug: your bug description
iOS software version: your IOS version
Phone: your apple phone model
Car: your vehicle brand, model and year
If you don't use the right format your post will be deleted as soon as possible!
Changelog
v1.1.5
- bug fixes and performance improvements
|
|
|
|
1.1.5
Jan 25, 2020 7:03:19 GMT
via mobile
Post by tsevier on Jan 25, 2020 7:03:19 GMT
HI an alle!
Description of bug: Dongle lässt sich nicht mit dem Auto verbinden, wenn die Zündung aus oder ein ist. Nur wenn der Motor läuft.
Habe es bei einem VW Touran 2015 probiert, da funktioniert es mit abgezogenem Schlüssel problemlos... Liegts am Dongle oder am Auto? (War bei 1.1.4 auch schon der Fall)
iOS software version: iOS 13.3
Phone: iPhone 6s
Car: VW T5 GP 2010
|
|
|
|
Post by octo|opto|koppler on Jan 27, 2020 13:27:08 GMT
Translated bug report from user tsevier Description of bug: no Connection between dongle and car, neither with ignition on nor off, only with engine running. Also tried with a VW Touran 2015 and it works even with key unplugged. Is it the dongle or the car? (same Problem in Version 1.1.4) iOS Software Version: iOS 13.3 Phone: iPhone 6s Car: VW T5 GP 2010
|
|
|
|
1.1.5
Jan 29, 2020 2:16:01 GMT
via mobile
Post by xborcox on Jan 29, 2020 2:16:01 GMT
Description of bug: will not connect to any control units other than brakes during full scan.
iOS software version: 13.3.1
Phone: IPhone 8
Car: your vehicle Audi A6 Allroad 2002
I’ve tried to run a full scan 3 times and it will only connect too the Control Unit for the brakes and shows not fault even though the cel is on.
|
|
maxn
New Member
Posts: 1
|
1.1.5
Feb 3, 2020 13:02:14 GMT
via mobile
Post by maxn on Feb 3, 2020 13:02:14 GMT
I had the same problem.
Solved it by switching off Bluetooth on my iPhone and turn it back on again.
|
|
|
|
1.1.5
Feb 5, 2020 20:47:54 GMT
via mobile
Post by ryanbridgen on Feb 5, 2020 20:47:54 GMT
Hi,
Just received my OBDeleven 2 today. Plugged into my car connected with app, updated firmware.
It wouldn’t read my cars details tried 3 times. Then prompted to manually enter VIN number.
It then connected showing a pic of my car and the voltage.
Did a full scan then after the last one it came up “scan failed”.
Tried again with engine running. Same thing.
Had a look at my car details but nothing is showing. i.e. engine unknown
While scanning it didnt see any faults even though there are, like brake pad sensors.
iOS 13.3.1
iPhone XS Max
VW Touareg 2006
|
|
|
|
1.1.5
Feb 6, 2020 17:30:32 GMT
via mobile
Post by moncier on Feb 6, 2020 17:30:32 GMT
I just got the OBDeleven today. It will not read my engine and I had to manually enter in my VIN. It doesn’t pick up any codes even though I have one. It gives no car information!
Running current IOS with XS Max iPhone.
2002 Audi TT 225 roadster
|
|
Deleted
Deleted Member
Posts: 0
|
1.1.5
Feb 16, 2020 12:38:42 GMT
Post by Deleted on Feb 16, 2020 12:38:42 GMT
appologies that this is not in the correct format but just letting you guys know forum.obdeleven.com/post/35601New account setup via IOS, user did not get the 200 credits on his account until he logged off and back on via Android. |
|
