|
|
Post by gareth685 on Jan 22, 2020 19:06:47 GMT
My B8 now no longer gives warning bings when the light switch is on auto or on and you open the drivers door (ingition off). It still bings if its on side lights.
I believw this occured after enabling Scandinavian mode but have tried disabling qnd re enabling and no difference.
Any idea what to look for?
|
|
|
|
Post by brenovalenca on Jan 22, 2020 19:27:22 GMT
I think so! Change the coding!
|
|
|
|
Post by gareth685 on Jan 22, 2020 20:34:55 GMT
I think so! Change the coding! I know that. Where? I had a look through control 9 and assume its one of the german titled settings. I have. OBDII Pro do long coding not an issue |
|
|
|
Post by brenovalenca on Jan 22, 2020 21:12:34 GMT
You need change in the adaptation central.9 and back the coding. Do you have a backup?
|
|
|
|
Post by gareth685 on Jan 23, 2020 9:37:53 GMT
No backup. I used credits to do the Scandinavian mod rather than long coding.
If i could read german it would be easier to identify. If you could highlight and copy and paste the words into google to translate that would at least help.
|
|
|
|
Post by brenovalenca on Jan 23, 2020 10:43:19 GMT
What's the year of the your car, model and etc? I work with this in my country and i have a backup.
|
|
|
|
Post by gareth685 on Jan 23, 2020 10:58:28 GMT
2016 Passat GT 240 BiTDi
|
|
|
|
Post by gareth685 on Jan 23, 2020 10:59:34 GMT
Its just a audible setting for when the switch is on dipped qhen the door is open
Its fine for the side lights
Auto does nothing as lights turn off when ignition is off
|
|
|
|
Post by brenovalenca on Jan 23, 2020 11:05:23 GMT
In my country there arent this modelo. Sorry. |
|
