|
|
Post by korisnik on Jan 21, 2020 6:38:02 GMT
Hello. Can anyone tell me which Byte in 09 Central Electrics is for enabling the Ambient lighting. I have facelift 2015 Audi A6 4G with RMC sistem navigation so i need to activate it manually. For the brightness i know that channel 52 in Adaptations needs to be set. Thanks
|
|
|
|
Post by hannibalm on Jan 22, 2020 16:48:38 GMT
For models without already active menu point of "Ambience Lighting" in the MMI:
MMI3G + or MIB NAVIGATION SYSTEM with touch input field
1. Select control unit 09 (vehicle electrical system)
2. Select control unit Long coding -> Function 07
3. Select byte 16
4. Activate bit 6
MMI3G Navigation plus with touch input field (= PRE-FACELIFT MODELS):
1. Select control unit 5F (information electronics)
2. Select adjustment 10
3. Set channel number 06 to 1.
4. The hidden menu can be opened with the key combination Car + Menu (both keys together), whereby as
first press the car button. (Please change to System Settings in the CAR menu beforehand)
5. Activate hidden menu -> car -> cardevicelist -> Interior Light
6.Hidden menu -> car -> carmenuoperation -> Interior Light -> value on 5
7. Hidden menu -> car -> carbusassignment set the value interior light to CAN comfort
Now leave the HiddenMenu again (e.g. press the radio or BACK button).
MIB Navigation plus with touch input field (= FACELIFT MODELS):
Connect the 5F information electronics control unit
Select control unit 5F adaptation function 10
Now change the following adjustment channels:
Vehicle menu operation-menu_display_ambient_illumination -> Set to "activated"
Vehicle menu operation-menu_display_ambient_illumination_over_threshold_high -> Set to "activated"
Vehicle function list BAP-Gen2-interieur_light_0x08 -> Adjust to "activated"
Vehicle function list BAP-_Gen2-interieur_light_0x08_msg_bus-> Adapt to "Databus comfort"
RMC navigation (= VOR-FACELIFT + FACELIFT MODELS):
The activation of the menu item ambient lighting is only possible by parameterization using a
VCP tester possible.
Connect the 5F control unit here and load the firmware proposed there with "ambient_light".
The following applies to ALL models after activation:
MMI reset
Press and hold the function key -1- (menu), the confirmation button -2-, and the navigation key -3-
simultaneously. The MMI then shuts down and restarts. Takes about 60 seconds)
In the CAR menu, the lighting can now be configured under the item Ambient lighting
|
|
|
|
Post by samhed on Mar 30, 2020 11:19:25 GMT
I also had to enable the ambient lighting in the long coding for each individual door. For each door, in 'byte 1' I had to set bit 0,1,3 and 4 to '1'.
|
|
|
|
Post by julmars33 on May 7, 2022 22:55:20 GMT
Where is the firmware? Im trying to code a c8
|
|
mic71
New Member
Posts: 5
|
Post by mic71 on Jul 30, 2022 11:38:12 GMT
Hi.
I'm new and need some help..
I have a transporter 6.1 with discover media pro head unit and digital cockpit. I just want to enter the menu for ambient lighting. I have no other light colours to change on the vehicle other than the illumination colours on the infotainment system and the digital cockpit..
Any idea where I need to look? There is no app to do this with my vehicle..
Thanks in advance. Mike
|
|
