ESC malfunction message, but no fault code on OBD11

new

« Prev
1
Next »

eos
New Member

Posts: 1

ESC malfunction message, but no fault code on OBD11 Jan 19, 2020 16:27:05 GMT via mobile

Quote

Post by eos on Jan 19, 2020 16:27:05 GMT

So, my Audi A4 B8.5 (2013 Avant Quattro 2.0TDI 130kw) shows ESC malfunction, refer to owners manual-message on dash screen.

However,I get no fault codes when scanning with OBD11, only warning on dash.

Any idea anyone what way should be taken to start solving this?

I did get on previous scan a fault code C100D13, regarding left rear epb. I opened the connector to the e-brake motor,little dust inside but pins and cable itself looked ok. Cleaned all contact points with contact cleaner and dried using comp. air.

After clearing fault codes, C100D13 did not come back on, but still there is warning about ESC fault on display.
This comes on after a while when vehicle is started.
And again, no codes when scanning.

Visit to the dealer,or what..?

Thank you for any good advise!

Regards
Eos

garistotle
New Member

Posts: 1

ESC malfunction message, but no fault code on OBD11 Oct 22, 2021 4:18:06 GMT via mobile

Quote

Post by garistotle on Oct 22, 2021 4:18:06 GMT

I’m super new to this thread. And a beginner overall with car maintenance.

I experienced a similar issue today.

I did an oil change and left the cap off while I started my Q5 to check oil levels. Really bad idle and vibration. I put the cap on immediately and that cured the problem. I cleared the faults from the misfires it caused and has been running smooth.

However, I have gotten an ESC warning a few times. But it only seems to happen when I am running scans with OBD11. I get no faults, just the warning. And it only seems to happen when I’m scanning and in park.

I drove to the store and had no issue. But if I run a brake system check with OBD11, I immediately get the ESC warning.

I’m gonna watch it for a few days and see how it goes, but my current assumption is that the scanner reading the system is what causes it and that it’s not actually a fault.

I have never gotten the fault before today and only started when I read the system after my oil change.

I doubt the oil change would cause the system fault to appear and I had driven the car an hour before without getting the fault.

cso
New Member

Posts: 1

ESC malfunction message, but no fault code on OBD11 Dec 19, 2021 9:31:25 GMT

Quote

Post by cso on Dec 19, 2021 9:31:25 GMT

Hello,
Recently I purchased an OBDeleven nextgen and from the first scan I received ESC warning on dashboard. Good thing is that it disappears after few seconds, but if I try to access Brake section I receive it again and this time it remains around 1 minute on dashboard.
It's quite strange as with VCDS this behaviour is not present.
It would be great if someone could explain this error - maybe it's a bug in firmware.

mraudiafour New Member Posts: 1	ESC malfunction message, but no fault code on OBD11 Oct 17, 2022 6:31:45 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by mraudiafour on Oct 17, 2022 6:31:45 GMT Did anyone in here get a resolved the issue I think my obdeleven is glitch

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

yncers: кто ставил дорожные знаки на туарег CR7 Nov 23, 2024 18:26:18 GMT

zuhair3434: Hello, i have golf 1.5ETSI imported used from Denmark to israel, i would like to update navegation, does any one know that? Nov 25, 2024 8:39:23 GMT

flowrider: Black friday sale looking pretty good. Wish there was an option for just credits tho Nov 26, 2024 9:46:40 GMT

whataboutthis: flowrider based on previous years there are more sales to come so fingers crossed for credits for you. Nov 26, 2024 9:51:02 GMT

shoxell: can you help me, i have traffic signs warning on in Audi A4 B9.5 and i cannot turn it off via obd11 because there is no application for this Nov 26, 2024 11:34:36 GMT

luigia3: ho un problema con l animazione fari rs3 su a3 8y ho acquistatp Nov 26, 2024 11:48:10 GMT

darkol75: Hello, can someone help me? Superb 2017 after turning on the video in motion everything works, but a lot of errors appeared in the 5F control unit, error code B200500. I can't delete it, how do I fix it via obd11 Nov 27, 2024 8:34:16 GMT

windsurfnut: Can you activate / deactivate flight mode (or achieve similar results) with OBDeleven 2024 Golf R? Nov 27, 2024 14:31:53 GMT

keysisis: Hello. Is it possible to use the rear lights when the daytime running lights are on? Thank you Nov 30, 2024 21:15:50 GMT

zuhair3434: Hello, i have OBDELEVEN for my mk8, nut once i've connected it to my other car BMQ x3 its keeps moving me to the app (OBDELEVEN) and get me out the app (OBDeleven VAG), the issue that OBDELEVEN app doesnt show the click one apps so i can costomize the BMW. Dec 1, 2024 11:57:26 GMT

whataboutthis: zuhair3434 just to confirm you are using the VAG app for your VW and the non VAG app for your BMW, in which case if you are using the non VAG app it should work and show you the OCA. Dec 1, 2024 15:27:09 GMT

cos: hey folks, stupid (or maybe not) question on the Mk8 Golf R vs MK8FL. I have a 2024 so on the forums here it seems like a lot is locked for it. However my 2024 is pre-facelift. 2025+ is the facelift for the USD market. Do I keep following the Mk8PFL codes? Dec 1, 2024 18:26:42 GMT

fin: My Seat Ateca Was first registered in February 2024. One assumes that it was made in 2023, is there any way I can confirm whether it is affected by the sfd 2 issue without purchasing an OBD eleven? Dec 2, 2024 16:02:55 GMT

telsown: Hi all,
Was wanting to do the same for my 2.0l 2017 A3 tfsi Quattro. Found this vid on YouTube:

youtu.be/j7RstmHR02w?si=XD4_bGYs8IdMstPe

If it works, will you let me know.

Terry. Dec 3, 2024 14:50:23 GMT

remia1: Dear forum members, is it possible to activate door warning light and puddle light with OBDeleven Pro Dec 4, 2024 8:44:46 GMT

ESC malfunction message, but no fault code on OBD11

Post by eos on Jan 19, 2020 16:27:05 GMT

Post by garistotle on Oct 22, 2021 4:18:06 GMT

Post by cso on Dec 19, 2021 9:31:25 GMT

Post by mraudiafour on Oct 17, 2022 6:31:45 GMT

Shoutbox