|
Post by lukeplonka on Jan 16, 2020 15:32:15 GMT
Hi Guys I have a question about this basic setting in the rear camera module. I have changed it ( because I added Discover Media ), and everything is working ok. Only Active lines are not correct. I checked with OBDeleven, and I have this kind of issue: So my questions are as follow: - Can I use OBDEleven to write in settings for different Passat (Passat Variant of course, like mine) where the lines are working fine? - Do I need to make a full calibration of camera?
|
|
ekkar
New Member
Posts: 41
|
Post by ekkar on Jan 17, 2020 6:54:18 GMT
Hi Guys I have a question about this basic setting in the rear camera module. I have changed it ( because I added Discover Media ), and everything is working ok. Only Active lines are not correct. I checked with OBDeleven, and I have this kind of issue: So my questions are as follow: - Can I use OBDEleven to write in settings for different Passat (Passat Variant of course, like mine) where the lines are working fine? - Do I need to make a full calibration of camera? Yes you should have the model coding within the module, and it seems that it needs a calibration since no values are showing.
|
|
|
Post by lukeplonka on Jan 20, 2020 8:22:49 GMT
Thanks for info
|
|