|
Post by mraman on Oct 9, 2016 12:28:14 GMT
I am having some problems activating the rear view camera. I have enabled the rear view camera option in the navigation menu (37). This can be done regardless if the camera is connected or not. If the camera connector is not present I get a fault message when scanning the car. If the cable is connected there is no fault. However when shifting into reverse gear I do not get the camera view, just the OPS-view. I found a thread on a Skoda forum with the same issue: www.briskoda.net/forums/topic/279218-reversing-camera-on-amundsen-plus. They seem to have solved the issue by going into the park steer assist module and enabling bit 5 on byte 0. When I go into this module and use the long coding to enable bit 5 I get the error message "function not available". Now where does this message come from? Is there some sort of bitmask that is read up from the unit when going into the menu that disables this? Or is it something in the obdeleven profile for this car? I get the error message immediately so it seems like it is not trying to code it. It is also trange that I am not able to set this option since I can enable the camera in the navigation menu without the camera connected.
|
|
|
Post by OBDeleven on Oct 10, 2016 6:16:56 GMT
I am having some problems activating the rear view camera. I have enabled the rear view camera option in the navigation menu (37). This can be done regardless if the camera is connected or not. If the camera connector is not present I get a fault message when scanning the car. If the cable is connected there is no fault. However when shifting into reverse gear I do not get the camera view, just the OPS-view. I found a thread on a Skoda forum with the same issue: www.briskoda.net/forums/topic/279218-reversing-camera-on-amundsen-plus. They seem to have solved the issue by going into the park steer assist module and enabling bit 5 on byte 0. When I go into this module and use the long coding to enable bit 5 I get the error message "function not available". Now where does this message come from? Is there some sort of bitmask that is read up from the unit when going into the menu that disables this? Or is it something in the obdeleven profile for this car? I get the error message immediately so it seems like it is not trying to code it. It is also trange that I am not able to set this option since I can enable the camera in the navigation menu without the camera connected. More data about your car will be helpful, post full scan log of your car.
|
|