|
Post by clausw on Jan 10, 2020 10:21:11 GMT
Have a Skoda Octavia 2015.
When I got my OBD11 I deactivated the Start-Stop through the apllication for this. This worked fine.
I then wanted to enable it again but that doesnt seem to work. In the app it shows that it enables it succesfully but it doesnt work in my car.
Anybody seen this before? What can I do?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 10, 2020 16:13:17 GMT
Not my car and not seen this issue before This is the code to turn it off Disable Start/Stop Select Control unit 19 Adaptation Start Stop Limit voltage Value=12 Read more: forum.obdeleven.com/thread/176/coding-adaptations#ixzz6Ae1JAzWAhave you checked out what start/stop start voltage limit is set to, I think this should be set to 7.6 to make it work.
|
|
nesti
Junior Member
Posts: 56
|
Post by nesti on Feb 1, 2020 9:38:49 GMT
Hi,
yes the default value is 7,6V.
I had the same problem on my Skoda RS with the start/stop although I never disabled it.
after 3 years my car didn't stop the engine anymore. I had the control light with the S/S icon which was striked out. maybe it's a weak batterie thing.
Did you check the voltage limit under adaptation? (as mentioned by testeronline)?
NESTi
|
|