|
|
Post by marcom89 on Jan 6, 2020 21:25:38 GMT
Hi guys,
soon I will buy the kit to install on my golf the reversing camera high version (dynamic lines) from Kufatec.
Has anyone tried to calibrate the reversing camera (6c) with obdeleven?
|
|
|
|
Post by vwjap on Jan 6, 2020 21:38:13 GMT
Normally they don’t come programmed so you have to go to someone with Odis to get the settings put in after install, I think for calibration you need a board with lines on it to go on the floor behind the car
|
|
|
|
Post by marcom89 on Jan 6, 2020 21:53:36 GMT
|
|
|
|
Post by florian on Jan 11, 2020 20:42:01 GMT
marcom89 Hi you can do it with Odis or VCP but you need the paper on the ground, can you tell me the codings that Kufatec provided you?
|
|
|
|
Post by marcom89 on Jan 13, 2020 18:39:07 GMT
marcom89 Hi you can do it with Odis or VCP but you need the paper on the ground, can you tell me the codings that Kufatec provided you? hello, I'm sorry but I postponed the purchase until I have certain news on the calibration. (I don't own vcds, vcp or ODIS).  |
|
|
|
Post by acquell on Jul 25, 2020 14:58:16 GMT
Hi,
I’ve managed to calibrate the rear view camera using Obdeleven on a c7 using a homemade board. Took a few bits of trial and error but fully calibrated now.
It’s easier with android than iOS at present as if you go to channel 001 on the camera module it gives the instructions of what channels you need to do (channel 004 and channel 005) then setting channel 001 to 1 to trigger calibration.
|
|
|
|
Post by ofektal8 on Jul 25, 2020 20:04:07 GMT
Hi, I’ve managed to calibrate the rear view camera using Obdeleven on a c7 using a homemade board. Took a few bits of trial and error but fully calibrated now. It’s easier with android than iOS at present as if you go to channel 001 on the camera module it gives the instructions of what channels you need to do (channel 004 and channel 005) then setting channel 001 to 1 to trigger calibration. Can you explain exactly how it was done using Obdeleven, im sure a lot of people will find it helpful including me xD |
|
|
|
Post by kraljo on Aug 6, 2020 13:30:22 GMT
Hi, I’ve managed to calibrate the rear view camera using Obdeleven on a c7 using a homemade board. Took a few bits of trial and error but fully calibrated now. It’s easier with android than iOS at present as if you go to channel 001 on the camera module it gives the instructions of what channels you need to do (channel 004 and channel 005) then setting channel 001 to 1 to trigger calibration. Hi acquell Could you please elaborate on the procedure a bit more? Where do we start? Witch security access is required? Where are the channels you mention (004, 005, 001) located? BR, |
|
|
|
Post by shogun on Dec 14, 2020 20:52:23 GMT
Hi, can you tell us how you did it?
|
|
|
|
Post by georgw on Aug 3, 2023 8:19:55 GMT
Has meanwhile anyone managed to calibrate the rear view camera using OBD11? If yes, please provide details as to which values to enter.
|
|
|
|
Post by chrisescos6 on Jan 9, 2024 21:53:58 GMT
Normally they don’t come programmed so you have to go to someone with Odis to get the settings put in after install, I think for calibration you need a board with lines on it to go on the floor behind the car Hi, I’ve managed to calibrate the rear view camera using Obdeleven on a c7 using a homemade board. Took a few bits of trial and error but fully calibrated now. It’s easier with android than iOS at present as if you go to channel 001 on the camera module it gives the instructions of what channels you need to do (channel 004 and channel 005) then setting channel 001 to 1 to trigger calibration. I have the calibration board, but for the life of me I can’t find instructions to calibrate my s6. Can you share what step you took? |
|
