|
Post by bendert96 on Jan 4, 2020 21:06:02 GMT
Is it possible to program the lights to go on with the remote? Without lightsensor?
|
|
|
Post by dv52 (Australia) on Jan 4, 2020 22:12:58 GMT
^^^^^bender: Hi - short answer (alas) is 'no'
Don
|
|
|
Post by bendert96 on Jan 5, 2020 0:15:24 GMT
^^^^^bender: Hi - short answer (alas) is 'no' Don Ugh too bad. Can control my windows with they remote. Can activate third brake light. But no coming home... Oh dv52 just an other question. I've programmed us lights. But when I stop the engine, and leave the contact at the position for power. My DRL ain't working anymore, but my blinkers are lighted up. Sorry for the incorrect therms
|
|
|
Post by dv52 (Australia) on Jan 5, 2020 5:22:52 GMT
^^^ bender: not strictly true- you can have Coming Home lights without a light sensor fitted - but it means that you will need to manually trigger the CH function before you leave the cabin (I recall that there was a problem with automating CH function- but I can't recall details). But Leaving Home definarely does require the light sensor.
As for your DRLs - what were the instructions that you used for US lights (there are quite a few)
Don
|
|
|
Post by bendert96 on Jan 6, 2020 20:09:12 GMT
Dv52 I've used this code. But they've worked perfectly. Maybe it came when I programmed the drl on/off function.
09-Boordnet]
[Security Toegang-16]
Voer de toegangscode in: 31347
[Aanpassen-10]
[Kanaal 09 '0 BLK light fitting VL B36-light function D 0 Select'] voor-rechts; Kies Standlicht Allgemein
[Kanaal 10 '0 BLK light fitting VL B36-dimming select CD 0'] nieuwe waarde: 30
[Kanaal 09 'Leuchte1BLK VRB20 light function D 1 Select'] voor-rechts; Kies Standlicht Allgemein
[Kanaal 10 'Leuchte1BLK VRB20-dimming CD 1'] nieuwe waarde: 30
[Kanaal 12 'Leuchte0BLK VL-B36 Lichfunktion E Select 0']; Kies: Blinken links Dunkelphase
[Kanaal 15 'Leuchte0BLK VL B36 dimming Direction EF']; Kies: Minimize
[Kanaal 12 'Leuchte1BLK VRB20 Light Function E 1']; Kies: Blinken rechts Dunkelphase
[Kanaal 15 'Leuchte1BLK VRB20 dimming Direction EF']; Kies: Minimize
|
|
|
Post by dv52 (Australia) on Jan 6, 2020 22:04:01 GMT
^^^ "Maybe it came when I programmed the drl on/off function" - huh? New information!!
What instruction did you use for this?
Don PS: the US lights instructions are OK - these shouldn't impact the DRLs (I hope you have LED turn-signal lamps and NOT incandescent lamps )
|
|
|
Post by bendert96 on Jan 9, 2020 22:17:40 GMT
^^^ "Maybe it came when I programmed the drl on/off function" - huh? New information!! What instruction did you use for this? Don PS: the US lights instructions are OK - these shouldn't impact the DRLs (I hope you have LED turn-signal lamps and NOT incandescent lamps ) I've used the app in obdeleven 😂😂
|
|
|
Post by dv52 (Australia) on Jan 9, 2020 22:38:25 GMT
bender: bummer - problem is that many apps leave no records of the changes that were made. Try this:
[Kanaal 15 'Leuchte0BLK VL B36 dimming Direction EF']; Kies: Maximise [Kanaal 15 'Leuchte1BLK VRB20 dimming Direction EF']; Kies: Maximize
Don
|
|