|
|
Post by maxi86 on Dec 31, 2019 15:29:33 GMT
Hej jag köpte appen sign assist men den säger att den inte hittar vägmärken?
|
|
|
|
Post by tiguandriver on Jan 18, 2020 11:48:12 GMT
I coded the function in my car instead of buying the app and got it working.
When starting the car I often get a warning that the road sign assistant
has limited functionality, but it still works.
There are a lot of instructions how to code this, this is how I did it.
Module 5F
Adaptation
- Car_Function_List_BAP_Gen2
- traffic_sign_recognition_0x21 = active
- traffic sign recognition 0x21 msg bus = data bus comfort
- Car_Function_Adaptions_Gen2
- menu_display_road_sign_identification = active
- menu_display_road_sign_identification_over_threshold_high = active
Long Coding
- Byte 24
- Bit 6 = enabled
Module A5
Adaptation
- Road sign detection fusion mode
- road sign detection = active
Long Coding
- Byte 1
- Bit 0 = enabled
- Byte 16
- Bit 4 = enabled
Module 17
Long Coding
- Byte 5
- Bit 2 = enabled
|
|
|
|
Post by maxi86 on Jan 18, 2020 13:51:31 GMT
Fins det nån bra video som man kan se vill inte förstöra nått?
|
|
|
|
Post by tiguandriver on Jan 18, 2020 18:56:22 GMT
Look what your default values are before changing, write them down on a piece of paper, screendump your device or take a backup of your module settings so you can restore them that way.
I personally wrote them down on a piece of paper.
Good luck!
|
|
|
|
Post by Carolco on Mar 28, 2020 12:29:05 GMT
Hello. In the instructions change this:
traffic sign recognition 0x21 msg bus = databus extended
|
|
|
|
Post by Carolco on Mar 30, 2020 20:05:46 GMT
It is from stock or retrofitted?
|
|
|
|
Post by maxi86 on Mar 31, 2020 9:28:55 GMT
Köpte den från eftermontering. Betalade 100 credit men står att den inte hittar vägmärken? Hittar ingen video heller
|
|
|
|
Post by dmig77 on Jun 6, 2020 19:32:02 GMT
This doesn`t work on my car. I've got an error in 56 and 5F u101400 😢. How fix it?
|
|
