Post by steve1 on Dec 25, 2019 18:53:57 GMT
I am trying to change the Road Ice Warning Temperatures in the Dashboard setting but have not been successful. This is a 17 GTI US spec car. I am using the NextGen Pro version with an ATT Z831 android phone running 6.0.1.
I get connected to the dongle and then try to login to the Dashboard. I have used all three codes, 47115, 25327, and 20103. Only 25327 has been successful and indicated the login was accepted. Once in I find the outside temperature, I change the entry and exit warning temperature and press the check button. The app just do loops back to the login in where I give it the 25327 code again. There have been times when the messages: (31) Function is not available and (7F) Function cannot be performed, incorrect diagnostic mode. The diagnostic mode at this time was VW diagnostic mode - active. I have tried all the other modes except Development and then get the (7F) message. It is not this is that important but it is driving me crazy and I believe that it should be able to be completed. Thanks for any help.
Here is a log: OBDeleven vehicle history log
Date: 2019-12-25 11:16
VIN: 3VW547AU9HM010858
Car: Volkswagen Golf GTI
Year: 2017
Body type: 5-dr hatchback
Engine: CXCB 162 kW (220 HP) 2.0 l
Mileage: 28506 KM
---------------------------------------------------------------
Diagnostic session
Control unit: 17 Dash Board
Value: VW - diagnostic mode
Mileage: 28506 km
Date: 2019-12-25 11:09
---------------------------------------------------------------
Diagnostic session
Control unit: 17 Dash Board
Value: End of assembly line mode (EOL)
Mileage: 28506 km
Date: 2019-12-25 11:07
---------------------------------------------------------------
Diagnostic session
Control unit: 17 Dash Board
Value: VW - diagnostic mode
Mileage: 28461 km
Date: 2019-12-21 16:09
I get connected to the dongle and then try to login to the Dashboard. I have used all three codes, 47115, 25327, and 20103. Only 25327 has been successful and indicated the login was accepted. Once in I find the outside temperature, I change the entry and exit warning temperature and press the check button. The app just do loops back to the login in where I give it the 25327 code again. There have been times when the messages: (31) Function is not available and (7F) Function cannot be performed, incorrect diagnostic mode. The diagnostic mode at this time was VW diagnostic mode - active. I have tried all the other modes except Development and then get the (7F) message. It is not this is that important but it is driving me crazy and I believe that it should be able to be completed. Thanks for any help.
Here is a log: OBDeleven vehicle history log
Date: 2019-12-25 11:16
VIN: 3VW547AU9HM010858
Car: Volkswagen Golf GTI
Year: 2017
Body type: 5-dr hatchback
Engine: CXCB 162 kW (220 HP) 2.0 l
Mileage: 28506 KM
---------------------------------------------------------------
Diagnostic session
Control unit: 17 Dash Board
Value: VW - diagnostic mode
Mileage: 28506 km
Date: 2019-12-25 11:09
---------------------------------------------------------------
Diagnostic session
Control unit: 17 Dash Board
Value: End of assembly line mode (EOL)
Mileage: 28506 km
Date: 2019-12-25 11:07
---------------------------------------------------------------
Diagnostic session
Control unit: 17 Dash Board
Value: VW - diagnostic mode
Mileage: 28461 km
Date: 2019-12-21 16:09