|
|
Post by quadslo on Dec 23, 2019 10:25:30 GMT
I had high beam assist active. I went to a shop that they retrofited heated seats. And now light assist is gone. I tried this and have the same settings as this guy in OBD11, but Light Assist is still not visible in the menu and it doesn't work if you try to turn it on with a light switch. |
|
|
|
Post by vwjap on Dec 23, 2019 11:43:51 GMT
Wow 3 and a half minutes of talking before actually getting to the programming and that programming is NOT activating light assist dude, just remember setting
Have you checked it hasn’t been unticked in the settings in the car menu?
|
|
|
|
Post by quadslo on Dec 23, 2019 14:58:00 GMT
The first line in the menu is missing now in my car.  Is there any other menu where it can be activated? |
|
|
|
Post by vwjap on Dec 23, 2019 16:34:16 GMT
Ok does your 09 module look like this?  Ok I’m not interested in the reset switch as I don’t use it anyway If it does look like the picture then two things you can try 1: press and hold the radio on/off button for 10 seconds 2: in car settings reset lights |
|
|
|
Post by quadslo on Jan 8, 2020 16:42:33 GMT
Guy who does coding managed to make ti work again in no time.
Thanks anyway
|
|
|
|
Post by dv52 (Australia) on Jan 8, 2020 21:46:43 GMT
I had high beam assist active. I went to a shop that they retrofited heated seats. And now light assist is gone. I tried this and have the same settings as this guy in OBD11, but Light Assist is still not visible in the menu and it doesn't work if you try to turn it on with a light switch. quadslo: hi . My hunch (guess really) is that the wrong Byte has been selected on the BCM (the hex09 module) when the heated seats were enabled. for heated seats, Byte 3, Bit 2-3 is used for Light assist, Byte 2, Bits 0-2 is used
What is the long code value on your BCM and what type of headlights are fitted to the car?
Don
|
|
|
|
Post by vwjap on Jan 8, 2020 23:07:05 GMT
|
|
