|
|
Post by staticgtf on Oct 3, 2016 12:01:07 GMT
Hi all! Please share your experiences with the apps you have used on your B6 Passat. Maybe something short and along these lines...? - Name of app
- Did it work?
- Ease of use (1-5)
That might save some hard earned credits as well as unnecessary posts in this forum... Cheers //Johan |
|
|
|
Post by mercury260 on Jan 2, 2017 3:52:35 GMT
Service reset.
Didn't work first time I tried however worked perfectly after I had disconnected and connected again. Maybe it was my Internet connection dropping out.
Ease of use was 5 out of 5 when it worked.
|
|
|
|
Post by markmorto on Feb 5, 2017 7:18:29 GMT
Daytime Running Lights
I installed aftermarket HIDs and had really bad flickering, so I used the app to disable DRLs. It worked great.
Ease of use - 5/5 as in very easy. I would have liked additional options, though, as in an option to set DRL brightness.
I also used long coding to set Xenons to "without shutter" (Byte 3, bit 4) - not an app, but it worked flawlessly.
|
|
|
|
Post by johnnyb6 on Mar 7, 2017 0:51:58 GMT
Daytime Running Lights I installed aftermarket HIDs and had really bad flickering, so I used the app to disable DRLs. It worked great. Ease of use - 5/5 as in very easy. I would have liked additional options, though, as in an option to set DRL brightness. I also used long coding to set Xenons to "without shutter" (Byte 3, bit 4) - not an app, but it worked flawlessly. Hello I was able to disable DRL but don't know the coding to activate Xenons. Can you help with the coding to activate Xenons? My B6 was on halogen bulbs now I'm running HIDs. I have flickering issue! It's killing me! Lol Thanks |
|
|
|
Post by markmorto on Apr 10, 2017 11:30:11 GMT
Did you get your flickering fixed? I used the long coding option, Central Electronics. You have to be connected to see it. Once you go into long coding, it's just numbers mainly on the page with options. Each page has 8 available options, though not all of them do anything. You have to scroll down to page 3 (byte 3) and select the bit 4 option. Then save it and you should be good to go.
|
|
|
|
Post by johnnyb6 on Apr 17, 2017 22:43:48 GMT
Did you get your flickering fixed? I used the long coding option, Central Electronics. You have to be connected to see it. Once you go into long coding, it's just numbers mainly on the page with options. Each page has 8 available options, though not all of them do anything. You have to scroll down to page 3 (byte 3) and select the bit 4 option. Then save it and you should be good to go. Worked!!! Thanks for your help! Happy B6 |
|
