|
Post by brokengti on Dec 11, 2019 13:18:18 GMT
Hi, I recently installed power folding mirrors on my GTI 2017 S trim (bought from shopDAP and installed by local body shop) and used the one click function in OBD11 Next Gen for auto folding mirrors. However, the mirrors do not fold and the puddle lights do not turn on. I have enabled the function in the “Mirrors and Wipers” section of the car. Still not working.
FYI, the blinker lights come on correctly and I am able to electronically adjust the mirrors which seems to indicate it was installed correctly.
Can someone please help me troubleshoot?
Thank you
|
|
|
Post by dv52 (Australia) on Dec 11, 2019 19:52:41 GMT
^^^brokengti: Hi. Of course there could be any number of causes as reasons why your folding mirrors don't operate correctly, but let's start with the more obvious checks: being the long code string on the driver and passenger door modules.
Are these software switches set (i.e are the boxes ticked in the Coding section of the door modules @ address hex42 and hex52)?
Puddle lights ("exit" lights) : Byte 1, Bit 2 Folding mirrors installed: Byte 4, Bit 4 Comfort folding:Bye 4, Bit 6
Don
|
|
|
Post by brokengti on Dec 11, 2019 21:13:06 GMT
Hi, thanks for the response! And sorry about my copied post on the other thread- I didn’t realize it would clutter up the forum.
And since I have the OBD11 Next Gen iOS, I do not have the Pro feature of long coding. I guess I would have to buy an Android or wait for Pro feature to come out on iOS? Thanks again!
|
|