|
|
Post by jordangl7 on Dec 10, 2019 5:46:21 GMT
Hi everybody I'm trying to activate the TPMS, I almost got it, but when I check in the infotainment screen and try to activate it, only appears the next message "this function is not available", I'm not sure if I need to change a Byte in the long coding ABS module, I only changed some values in radio and central command modules, could anyone help me? thanks in advance.  |
|
|
|
Post by karlitos on Dec 23, 2019 1:04:30 GMT
Unfortunately, it seems to me that the ABS module (5Q0 614 517 EJ) that equips yours Jetta is not compatible with indirect TPMS.
|
|
|
|
Post by alvaross on Jul 31, 2020 19:02:57 GMT
A Uruguayan seems to have managed this way in a GLI:
03 - ABS
byte 27 - bit 4,6
byte 28 - bit 7
5F-Adapt-> Vehicle function list BAP-tire_pressure_system_0x07> Set value to "activated"
5F-Adapt-> Vehicle function list BAP-tire_pressure_system_0x07_msg_bus> Set value to " Suspension data bus"
5F-Adapt-> Vehicle menu operation-menu_display_rdk > Set value to "activated"
5F-Adapt-> Vehicle menu operation-menu_display_rdk_over_threshold_high > Set value to "activated"
17 – Instruments
Coding Byte 4-> Enable bit 0 ("Indirect Tire Pressure Monitoring System (TPMS)
|
|
|
|
Post by karlitos on Sept 7, 2020 23:10:03 GMT
Thanks! It really works! I highlight some synonyms that I found here: 03 - Brakes Byte 27 - Select bit 4 and 6 Byte 28 - Select bit 7 5F - Adaptation -> Car Function List BAP Gen 2 - tire_pressure_system_0x07> Set value to "activated" 5F - Adaptation -> Car function list BAP - tire_pressure_system_0x07_msg_bus> Set value to " Suspension data bus" 5F - Adaptation -> Car_Function_Adaptations_Gen2 - menu_display_rdk > Set value to "activated" 5F - Adaptation -> Car_Function_Adaptations_Gen2 - menu_display_rdk_over_threshold_high > Set value to "activated" 17 – Dashboard/Instruments Long coding - tire pressure monitoring display - Set to "Yes"  |
|
