|
|
Post by ari007 on Sept 29, 2016 10:07:09 GMT
Changed my DRLs so they would not dim on indicator now want to return back to them dimming any instructions on how to with a option of me selecting how much they dim i know who will be providing this information so thanks in advance Don  |
|
|
|
Post by dv52 (Australia) on Sept 29, 2016 22:48:01 GMT
Changed my DRLs so they would not dim on indicator now want to return back to them dimming any instructions on how to with a option of me selecting how much they dim i know who will be providing this information so thanks in advance Don Ari: Hello again I'm not sure what method you used to disable "DRL Wink" (it can be done a number of ways), but here's the factory settings for enabling them Leuchte4TFL LB4 (left-side DRL) Lichtfunktion C 4 > Blinken links aktiv (beide Phasen) Lichtfunktion D 4 > not active Dimmwert CD 4 > 0 Dimming Direction CD 4 > minimize Leuchte5 TFL RB32 (right-side DRL) Lichtfunktion C 5 > Blinken rechts aktiv (beide Phasen) Lichtfunktion D 5 > not active Dimmwert CD 5 > 0 Dimming Direction CD 5 > minimize If you want to vary the dimming amount - make the Dimmwert channel a higher number Don Don't make these changes if the channels above are populated with other Leuchte commands |
|
