maaks
New Member
Posts: 10
|
Post by maaks on Dec 4, 2019 18:35:04 GMT
Hi guys, i recently retrofited folding mirrors on my A3 8v g-tron but i have a couple of problems with It not working like the factory ones. I give you a quick list of what i had to buy: Pair of mirrors with motors driver's door pushbutton Driver's and passenger's door modules This far everything is fine because the mirrors fold and everything so coding went perfect. Only thing that annoys me is that i haven't been able, since installing them, to make them fold when closing/turning on the ignition so i'm constricted to manually do it everytime i leave and get into the car. I also haven't been able to activate the function on the MMI to either able or disable the folding mechanism. If you could help me with at least the locking folding it'd be very much appreciated, mind it's a pre-facelift model Read more: forum.obdeleven.com/conversation/9094#ixzz67AGHdiGd
|
|
|
Post by dv52 (Australia) on Dec 6, 2019 22:30:44 GMT
Hi guys, i recently retrofited folding mirrors on my A3 8v g-tron but i have a couple of problems with It not working like the factory ones. I give you a quick list of what i had to buy: Pair of mirrors with motors driver's door pushbutton Driver's and passenger's door modules This far everything is fine because the mirrors fold and everything so coding went perfect. Only thing that annoys me is that i haven't been able, since installing them, to make them fold when closing/turning on the ignition so i'm constricted to manually do it everytime i leave and get into the car. I also haven't been able to activate the function on the MMI to either able or disable the folding mechanism. If you could help me with at least the locking folding it'd be very much appreciated, mind it's a pre-facelift model Read more: forum.obdeleven.com/conversation/9094#ixzz67AGHdiGdmaaks: Hi.
For non- manual mirror folding
Go to the hex 09 module (Central electrics)- select adaptation - search for Spiegelverstellung - select Funk Spiegelanklappung Modus - this channel has 2 x allowable settings- select by look command via remote control key if you want the mirrors to automatically fold on lock and then to automatically unfold when ignition is turned ON - or, select by convenience operation via remote control key to fold/unfold when you hold the fob for 5 secs
To place a software switch on MENU to enable mirror fold/unfold - set the following channel
Spiegelverstellung-Menuesteuerung Funk Spiegel anklappen > active
Don
PS: use the access code 31347 when asked
|
|