|
Post by coljeman on Dec 1, 2019 14:37:28 GMT
hi. in my golf 2014 i try oil temp in dis app, after that i loose my outside temp on dis. when i undo oil temp. in app. same problem no outside temp. in dis. its only show in multimedia screen, and when is -1 celsius only show snow icon in dis...
i try to deactivated and activated coding for outside temp. but nothing hapened.
|
|
|
Post by dv52 (Australia) on Dec 1, 2019 21:23:44 GMT
^^^^coljeman:hi. One-click Apps are marketed by OBD11 as a useful way of changing code/adaptation channels for the uninitiated and whilst they are easy to use - the problem is you don't know what changes are made to your car. For that reason alone - I don't use one click Apps because I ALWAYS want to know how the settings in my car are being changed. That said - I understand that (some?) one-click Apps now do disclose this information, I don't know if all Apps do this, but there has been reports on this forum of additional records appearing in the History reports days after folk use one-click Apps. So- try looking in the History reports for your car for information about what changes were made by the one-click App - and then reverse the changes. To do this - use the steps in my screenshot below. Don
|
|
|
Post by coljeman on Dec 11, 2019 16:10:18 GMT
hi. screen shot not work?
|
|
|
Post by dv52 (Australia) on Dec 13, 2019 21:32:41 GMT
^^^ OK- second suggestion: for ambient temperature - go to coding in the dashboard module (hex17 module) - make sure Byte 10, Bit 3 is ticked
For the oil temperature display - Byte 10, Bit 1 should be ticked
Don
|
|