okram
New Member
Posts: 27
|
Post by okram on Nov 30, 2019 10:58:14 GMT
I have a problem with the rain sensor, with automatic closing due to rain it works regularly, while when it rains it doesn't work automatically but it turns on the lights when it detects rain, so the sensor works ,. I tried to see the data during operation with dry glass and it detects a value of 15, it is as if the glass were wet. Does anyone have any idea how to reset the value to zero? OBD11 anomaly is incorrect installation position. GOLF MK7 2013 THANKS
|
|
okram
New Member
Posts: 27
|
Post by okram on Dec 1, 2019 5:38:27 GMT
yes I tried but it is the same thing, when it rains it always goes intermittently, at this point I think it could be the gel that covers the sensor which is a little ruined. I ordered the new gel pad let's see if it can depend on that.
|
|
|
Post by dv52 (Australia) on Dec 1, 2019 5:51:45 GMT
^^^^Is the long code value of the rain sensor 00A8DD?
Don
|
|
okram
New Member
Posts: 27
|
Post by okram on Dec 1, 2019 6:29:54 GMT
^^^^Is the long code value of the rain sensor 00A8DD? Don it's the same, or I insert 00A8DD or 06A8DD the problem remains the same, wrong installation position, I think it's the damaged gel pad.
|
|
okram
New Member
Posts: 27
|
Post by okram on Dec 15, 2019 10:33:57 GMT
Good morning everyone, update of the RLFS humidity lights rain sensor.
I restored the gel pad but the problem persists, I disconnected the connector from the sensor and I have a fault in the communication of the rain light and humidity sensor, but the fault "wrong installation position" remains incorrect even with the connector disconnected, so inevitably there must be an incorrect sensor parameter somewhere else but I don't know where. Something comes to mind.
Thanks
|
|