|
Post by trickyaus on Nov 27, 2019 12:34:45 GMT
Engine start/stop button HeartBeat effect (Keyless) "pulsating" Engine Start-stop button. OBD11 Version. The heart-beat effect pulses when the door is unlocked and the engine is not turned-on and after the engine is switched-off and the interior lights are still illuminated. Whilst the engine is running, the button illumination is steady. Enable the heart-beat (MyBeat) light effect to the Engine start/stop button for vehicle with keyless * Select Control unit: B7 * Enter Security Code: 20103 * Select Adaption. In the Search Field: Start typing, lights *Change both these fields to Activated.. - ZAT_illumination_concept_mybeat_clamp58xt - ZAT_illumination_modus_mybeat_clamp58xt The button starts it's heat-beat pulse immediately after the changes are made 👍 upload pic
|
|
|
Post by nocren on Jan 3, 2020 8:16:03 GMT
This don't work on my 2019 (pre-facelift) Skoda Superb L&K. When I go to Control Unit B7, and search for lights in the long coding, the ZAT that you need to change here does not show up. Maybe they have changed things on my model year or so, but it wont work on my car. I cant even find the right things to change.
|
|
|
Post by MartiniB on Jan 3, 2020 8:29:13 GMT
MY16 OK
--------------------------------------------------------------- Adaptation _ _ Control unit: B7 Access Startsystem Interface _ _ Name: DeveloperCoding: Search lights _ _ Values: _ _ _ _ ZAT_illumination_concept_mybeat_clamp58xt: _ _ _ _ _ _ Old value: Not activated _ _ _ _ _ _ New value: activated _ _ _ _ ZAT_illumination_modus_mybeat_clamp58xt: _ _ _ _ _ _ Old value: Not activated _ _ _ _ _ _ New value: activated
|
|