|
|
Post by ponpon on Nov 18, 2019 12:18:31 GMT
Hello.
Hello. I use a Gen2 device.
I tried to install Video in Motion, a one-click app today, but I couldn't.
I received a notification saying “Not supported”.
What is the cause?
There is no mention of models that cannot be used in the explanation.
Of course, I have tried it in the ignition state and have enough credit.
Thank you
|
|
|
|
Post by vwjap on Nov 18, 2019 12:38:10 GMT
More details on the car?
|
|
|
|
Post by ponpon on Nov 18, 2019 13:08:32 GMT
Thank you for Reply.
Vehicle is 2018 MK7.5.
My friend MK7.5 was able to work.
|
|
|
|
Post by vwjap on Nov 18, 2019 13:19:07 GMT
Did you do your friends on the gen2? 2018 should be good though, did you use a iOS or Android? Wonder if the gen2 can’t do the VIM just yet
|
|
|
|
Post by dv52 (Australia) on Nov 18, 2019 22:14:25 GMT
^^^^ Isn't the VIM one-click-app limited to devices with software ID below a certain number? I can't recall the actual number (1000 - perhaps?)
takachin: Try running the App on the dongle that you used on your friends car
Don |
|
|
|
Post by vwjap on Nov 18, 2019 22:21:29 GMT
What do you mean don 1000?
|
|
|
|
Post by dv52 (Australia) on Nov 18, 2019 23:03:29 GMT
^^^ I mean that my understanding is that the VIM app will not work if the MIB firmware number is beyond a certain value - can't remember the actual firmware number. I tried using the APP on my Audi A3 (2018 build) and the firmware number was beyond the threshold stated in the APP - so I wouldn't be surprised if an MY18 Golf might face the same problem (unless Voltas has updated the APP) perhaps?
Don
|
|
|
|
Post by ponpon on Nov 19, 2019 1:33:26 GMT
In other words, isn't it written in the app, but can't it be used with IDs over 1000?
|
|
|
|
Post by goldengrams on Dec 4, 2019 20:31:49 GMT
Any update on this. 2019 Alltrack SE, and I can not get VIM to work. Just says not supported. Actually almost everything is not supported. I can not get Windows Via Fob either. Am I missing something?
|
|
|
|
Post by vwjap on Dec 4, 2019 20:34:11 GMT
^^^ I mean that my understanding is that the VIM app will not work if the MIB firmware number is beyond a certain value - can't remember the actual firmware number. I tried using the APP on my Audi A3 (2018 build) and the firmware number was beyond the threshold stated in the APP - so I wouldn't be surprised if an MY18 Golf might face the same problem (unless Voltas has updated the APP) perhaps? Don Thanks for the clarification mate 👍🏻 |
|
|
|
Post by dv52 (Australia) on Dec 5, 2019 4:20:28 GMT
In other words, isn't it written in the app, but can't it be used with IDs over 1000? takachin: Yes - I believe that is correct at the time of writing. It certainly is the case on my MQB platform Audi which shares the same DNA as the Gold mk7 (and mk7.5) - see the bit that I have boxed in yellow in the pic below (and ignore Voltas IT's bad English).
Don
|
|
rix
New Member
Posts: 1
|
Post by rix on Jan 3, 2020 12:31:52 GMT
any updates triede last night on an 18 model 2.0 tdi with navi and aid did not work
i did buy it for this reason as i have vcds for the other stuff
regards
Sören
|
|
|
|
Post by Carolco on Jan 3, 2020 14:00:39 GMT
I had executed twice with OBDeleven application. In the second it works....
|
|
ps
New Member
Posts: 13
|
Post by ps on Jan 3, 2020 17:23:21 GMT
Modul 5f
adaptation
testmode_video_speed_cutoff
changing that to a higher speed would probably work
|
|
kkk
New Member
Posts: 1
|
Post by kkk on Jun 13, 2020 18:36:03 GMT
Hello
I have the same problem with video in motion and loads of apps more than half of them not supported...mk7.5 golf
Any ideas?
|
|
|
|
Post by Carolco on Jun 14, 2020 10:02:44 GMT
May be your car is new, and have a firmware in your 5F unit that no like the use of the video in motion. Vw fix his firmware in each new version....
|
|
