|
|
Road sign
Nov 11, 2019 19:01:51 GMT
via mobile
Post by bernd17 on Nov 11, 2019 19:01:51 GMT
Where can I go to obdeleven in STG A5
Set the VZE additional characters with which coding
|
|
|
|
Post by Carolco on Nov 11, 2019 20:17:05 GMT
|
|
|
|
Road sign
Nov 11, 2019 20:50:48 GMT
via mobile
Post by bernd17 on Nov 11, 2019 20:50:48 GMT
I have coded so yes but I miss the additional characters, for example. No passing
|
|
|
|
Post by newty on Nov 12, 2019 9:26:45 GMT
There are two types of cameras: Hardware numbers starting with 3Q0 (newer models) and 5Q0 (older models) - they coding possible and needed differs between them. Carolco linked a tutorial for 3Q0 types. 3q0 does not have "show additional signs" and "show end of regulation" anymore. They are shown automatically. With 5q0 (most prefacelift have 5q0) you will need in the camera (do not us the long coding and adaptions for a5 shown above, everthing else is the same): * Long Coding: Enable Byte 1 Bit 0 * Adaptions: Show additional signs to 00100111 * Adaptions: Show end of speed regulation: Active |
|
|
|
Road sign
Nov 12, 2019 11:01:46 GMT
via mobile
Post by bernd17 on Nov 12, 2019 11:01:46 GMT
with me is only a sign in the MFA and indeed the speed Limited
I have the camera Q30
|
|
|
|
Post by newty on Nov 12, 2019 13:16:13 GMT
When not definitely selecting traffic signs display in the mfd (There is a new card appearing in driving data) - you will only see the speed limit in the top row (and a very shallow second red ring below, when there is more than one sign).
On the driving data card you will see all signs next to each other, actually being able to view more than the speed limit
|
|
|
|
Road sign
Nov 12, 2019 13:34:05 GMT
via mobile
Post by bernd17 on Nov 12, 2019 13:34:05 GMT
and how do I get the next to each other in the MFA
|
|
|
|
Post by vwjap on Nov 12, 2019 13:49:06 GMT
Just change the view of the MFD to speed limits, (on mine it’s the left/right arrow on the right panel on the steering wheel, scrolls round from drive assist, music, etc, and when you get to the menu that’s driving data just scroll down to signs, I think by pressing ok) you have to have them in the main screen for side to side Ok I have the AID but normal it’s like this (red circle)  And on the page a bigger sign comes up where the road/car is |
|
|
|
Post by newty on Nov 12, 2019 15:08:02 GMT
It's exactly how vwjap pointed out, even with analog instruments.
|
|
|
|
Post by vwjap on Nov 12, 2019 17:08:57 GMT
Here you go   |
|
|
|
Road sign
Nov 13, 2019 14:44:35 GMT
via mobile
Post by bernd17 on Nov 13, 2019 14:44:35 GMT
STG A5: Access Permission 20103 Channel Sign End of speed limit set to active where can I find the entry
|
|
|
|
Post by vwjap on Nov 13, 2019 14:50:54 GMT
As said, if you have a facelift car you will have the 3Q model camera, and the don’t have that setting anymore as it’s done automatically
|
|
|
|
Road sign
Nov 13, 2019 16:03:00 GMT
via mobile
Post by bernd17 on Nov 13, 2019 16:03:00 GMT
Adaptation
Control unit: 5F Information electronics 1 Name: Car_Function_List_BAP_Gen2
traffic_sign_recognition_0x21_msg_bus
with some of them it stands here from
Data bus extended to comfort
or to code infotainment
only I wonder what is
rich Untitled
|
|
