|
Post by vwgolfr7 on Nov 11, 2019 11:56:59 GMT
Dear OBD wizards,
Have the following error codes showing up:
---------------------------------------------------------------
03 Brakes 1
System description: ESC
Software number: 5Q0614517CH
Software version: 0743
Hardware number: 5Q0614517AH
Hardware version: H62
Serial number: 63056000000129
ODX name: EV_Brake1UDSContiMK100IPB
ODX version: 036010
Long coding: 01FA6BA1542221754778070540C66980D62A84E2E0029677184250F8C208430000000012121212B835351919323200
Trouble codes:
B116816 - Steering angle sensor Voltage too low
Intermittent
C114201 - Terminal 31 Electrical error
Intermittent
---------------------------------------------------------------
Any ideas? Hope its not going to be a costly repair :S
Any help is greatly appreciated.
|
|
|
Post by dv52 (Australia) on Nov 12, 2019 7:38:19 GMT
vwgolfr7: Hmm............Of course anything is possible with such little information, but the 2 x DTCs can be related. Terminal 31 (the 2nd error) is the earth potential - the intermittent nature of this DTC could be caused by a faulty earth connection in the Brake module. The first error (low voltage) may be caused by the T31 error - perhaps.
Anyway, my suggestion is check the earth connections (loose bolts, or connectors, or faulty earth wires)
Don
|
|
|
Post by vwgolfr7 on Nov 12, 2019 12:54:22 GMT
Thanks Don,
You mean the brake module or the ABS unit (googled 5Q0614517AH)? Pretty new at this..
Interesting note that I don't have any lights on the dash regarding brakes or ABS.
|
|
|
Post by dv52 (Australia) on Nov 12, 2019 19:29:05 GMT
the ABS module is integrated into the ABS unit - but be aware that if you release the 46 x pin connector from the ABS module - you will need to re-calibrate a bunch of sensors (i.e. carry out basic setting of the steering angle sender - G85-, the lateral acceleration sender - G200-, the longitudinal acceleration sender - G251- and the brake pressure sender -G201-). This is not a trivial exercise.
Don
|
|