Post by dl on Nov 3, 2019 21:15:06 GMT
Hello. So I've recently bought OBD11 Pro to code adaptation for installed passenger airbag switch.
Before trying to code the adaptation I've tried if it actually works and coded two things using Apps. It was all OK.
Then when I tried to code the adaptation I got red toast saying 31 (function not available).
My steps:
Go to Control Units => 15 Airbag => Adaptation => Airbag adaptations
Then Key Switch => Airbag deactivation key switch installed
Either I do that with Security code or without (app says security code is good) I get the 31 (function not available).
From what I already read it should work fine this way.
Can anybody help me out? What am I doing wrong?
Before trying to code the adaptation I've tried if it actually works and coded two things using Apps. It was all OK.
Then when I tried to code the adaptation I got red toast saying 31 (function not available).
My steps:
Go to Control Units => 15 Airbag => Adaptation => Airbag adaptations
Then Key Switch => Airbag deactivation key switch installed
Either I do that with Security code or without (app says security code is good) I get the 31 (function not available).
From what I already read it should work fine this way.
Can anybody help me out? What am I doing wrong?