ugmac
New Member
Posts: 7
|
Post by ugmac on Sept 22, 2016 7:32:42 GMT
Hi all
I have a Canadian MK7 Golf R. It seems like DRL will be OFF if low beams are on for our models. Is there a way to make DRL stays on with low beams?
Thanks
ug
|
|
|
|
Post by dv52 (Australia) on Sept 22, 2016 8:22:19 GMT
Hi all I have a Canadian MK7 Golf R. It seems like DRL will be OFF if low beams are on for our models. Is there a way to make DRL stays on with low beams? Thanks ug ugmac: Hello: I don't have a Canadian Golf R (I live in Australia), but are you sure that the DRL goes off completly when the low beams are switched-on? I have the complete settings for the Central electrics control module for a 2015 TDI (Canadian) in my database and the settings suggests that the DRL (which is an LED type) dims to 26% in the Parking light function. Can you post-up a picture of the screen shot for Leuchte2SL VLB10 Leuchte-set ? Don |
|
|
|
Post by mathmk7 on Sept 22, 2016 16:42:35 GMT
Hi there , I used the fonction dimmewert Ef3 and I put this to 100 and now my drl stay full brightness with my fogs ON in parking lights position, some say it's draining the battery a bit more but Ill be using it only for the swagg look 😆 before with my euroswitch when I turned the fogs ON my drl were dimmed to 26% !
|
|
ugmac
New Member
Posts: 7
|
Post by ugmac on Sept 22, 2016 17:45:09 GMT
Hi all I have a Canadian MK7 Golf R. It seems like DRL will be OFF if low beams are on for our models. Is there a way to make DRL stays on with low beams? Thanks ug ugmac: Hello: I don't have a Canadian Golf R (I live in Australia), but are you sure that the DRL goes off completly when the low beams are switched-on? I have the complete settings for the Central electrics control module for a 2015 TDI (Canadian) in my database and the settings suggests that the DRL (which is an LED type) dims to 26% in the Parking light function. Can you post-up a picture of the screen shot for Leuchte2SL VLB10 Leuchte-set ? Don Thanks Don. Here are the screenshots.    |
|
ugmac
New Member
Posts: 7
|
Post by ugmac on Sept 22, 2016 17:46:09 GMT
Hi there , I used the fonction dimmewert Ef3 and I put this to 100 and now my drl stay full brightness with my fogs ON in parking lights position, some say it's draining the battery a bit more but Ill be using it only for the swagg look 😆 before with my euroswitch when I turned the fogs ON my drl were dimmed to 26% ! Thanks for tip, however it didn't work for me.  |
|
|
|
Post by dv52 (Australia) on Sept 23, 2016 2:59:58 GMT
ugmac: Hello: I don't have a Canadian Golf R (I live in Australia), but are you sure that the DRL goes off completly when the low beams are switched-on? I have the complete settings for the Central electrics control module for a 2015 TDI (Canadian) in my database and the settings suggests that the DRL (which is an LED type) dims to 26% in the Parking light function. Can you post-up a picture of the screen shot for Leuchte2SL VLB10 Leuchte-set ? Don Thanks Don. Here are the screenshots. ugmac: Thanks for the screenshots.
Hmm....................looks like someone has done some work on this Leuchte-set! 
Not sure what's happening in the CD alpha pair in your picture- the combination of the DRL-wink command (i.e. Blinken links aktiv (beide Phasen)) and the Single-Sided-Parking-light (SSPL) command (i.e. Parklicht links (beidseitiges Parklicht aktiviert li & re)) together in the same Alpa pair is real odd. But even more strange is the Dimmwert CD setting of 100 when used with a Dimming Direction CD setting of minimize. Why would this strange mix of values be used?
Anyhow, rather than your current-settings doing my head-in, I started from scratch and assumed that you want to keep DRL wink and SSPL functions on the DRLs.
So the two pictures below are the new settings for the Right-side DRL (which is Leuchte3SL VRB21) and the Left-side DRL (which is Leuchte2SL VLB10). I've designed the tweak so that the illumination level of the DRL when the Parking Lights are on is 100%. This means that the DRLs are illuminated ALL of the time that the ignition switch is turned-on - I assume this is what you want. I decided long ago when I first started designing these tweaks for others not to be their moral conscience - nevertheless, I would urge you to please consider if this tweak is "friendly" to on-coming traffic at night and if it is legal where you live!
I've also not followed the usual factory practice of VW to put the Parking Light function and the SSPL function together in the same alpha pair and giving both the same illumination level. Because you wanted the Parking Light to be illuminated at 100%, I've put the SSPL function in a separate alpha-pair and I've given this activity an illumination level of 26 % - which is the factory setting for SSPL. Even though you have LED lights in the DRL fittings, the 26% value helps reduce the current drawn from the battery in SSPL mode. As I said, this is how VW sets-up this function.
Finally, because the DRL illumination has been made so high from this tweak, I guarded against the possibility that glare from these lamps overwhelm the turn signal. For this reason, I have given the DRL wink function the highest priority. This means that DRL wink works even when the headlights are switched-on. As I said, I've done this as a safety issue to compensate for the (possible) additional glare to on-coming traffic from the now bright DRL. So, I suggest that you don't remove the DRL wink function
Don
PS: If you implement my changes- please be careful when selecting the settings (and make sure that you use the correct "links"/"rechts" commands)
Right-side DRL
Left-side DRL
|
|
ugmac
New Member
Posts: 7
|
Post by ugmac on Sept 24, 2016 2:58:10 GMT
Thank you so much Don. I've applied everything as what you suggested and works great. Now just out of curiosity, can you post factory default settings as well?
I have to admit those original settings were me messing with it. Lol. Apparently I don't know what I am doing.
Thanks again for helping me out!
ug
|
|
|
|
Post by dv52 (Australia) on Sept 24, 2016 4:06:23 GMT
Thank you so much Don. I've applied everything as what you suggested and works great. Now just out of curiosity, can you post factory default settings as well? I have to admit those original settings were me messing with it. Lol. Apparently I don't know what I am doing. Thanks again for helping me out! ug Here you go:- Leuchte3SL VRB21-Lasttyp 3 > 4 - LED Tagfahrlichtmodul Signal Leuchte3SL VRB21-Lampendefektbitposition 3 > 4C Leuchte3SL VRB21-Fehlerort mittleres Byte DTC-DFCC 3 > 4C Leuchte3SL VRB21-Lichtfunktion A 3 > Tagfahrlicht Leuchte3SL VRB21-Lichtfunktion B 3 > not active Leuchte3SL VRB21-Dimmwert AB 3 > 100 Leuchte3SL VRB21-Lichtansteuerung HD AB 3 > Always Leuchte3SL VRB21-Lichtfunktion C 3 > Blinken rechts aktiv (beide Phasen) Leuchte3SL VRB21-Lichtfunktion D 3 > not active Leuchte3SL VRB21-Dimmwert CD 3 > 0 Leuchte3SL VRB21-Dimming Direction CD 3 > minimize Leuchte3SL VRB21-Lichtfunktion E 3 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte3SL VRB21-Lichtfunktion F 3 > Parking light right Leuchte3SL VRB21-Dimmwert EF 3 > 26 Leuchte3SL VRB21-Dimming Direction EF 3 > maximize Leuchte3SL VRB21-Lichtfunktion G 3 > not active Leuchte3SL VRB21-Lichtfunktion H 3 > not active Leuchte3SL VRB21-Dimmwert GH 3 > 0 Leuchte3SL VRB21-Dimming Direction GH 3 > maximize Leuchte2SL VLB10-Lasttyp 2 > 4 - LED Tagfahrlichtmodul Signal Leuchte2SL VLB10-Lampendefektbitposition 2 > 48 Leuchte2SL VLB10-Fehlerort mittleres Byte DTC-DFCC 2 > 4A Leuchte2SL VLB10-Lichtfunktion A 2 > Tagfahrlicht Leuchte2SL VLB10-Lichtfunktion B 2 > not active Leuchte2SL VLB10-Dimmwert AB 2 > 100 Leuchte2SL VLB10-Lichtansteuerung HD AB 2 > Always Leuchte2SL VLB10-Lichtfunktion C 2 > Blinken links aktiv (beide Phasen) Leuchte2SL VLB10-Lichtfunktion D 2 > not active Leuchte2SL VLB10-Dimmwert CD 2 > 0 Leuchte2SL VLB10-Dimming Direction CD 2 > minimize Leuchte2SL VLB10-Lichtfunktion E 2 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte2SL VLB10-Lichtfunktion F 2 > Parklicht links (beidseitiges Parklicht aktiviert li & re) Leuchte2SL VLB10-Dimmwert EF 2 > 26 Leuchte2SL VLB10-Dimming Direction EF 2 > maximize Leuchte2SL VLB10-Lichtfunktion G 2 > not active Leuchte2SL VLB10-Lichtfunktion H 2 > not active Leuchte2SL VLB10-Dimmwert GH 2 > 0 Leuchte2SL VLB10-Dimming Direction GH 2 > maximize |
|
ugmac
New Member
Posts: 7
|
Post by ugmac on Sept 24, 2016 7:39:21 GMT
Here you go:- Leuchte3SL VRB21-Lasttyp 3 > 4 - LED Tagfahrlichtmodul Signal Leuchte3SL VRB21-Lampendefektbitposition 3 > 4C Leuchte3SL VRB21-Fehlerort mittleres Byte DTC-DFCC 3 > 4C Leuchte3SL VRB21… You are the man! Based on all the information you gave me, I was able to code DRL to dim to 35% while low beam is on and turn off when turn signal is on. Now I have my headlights behave exactly the way I want them to be, woohoo! ug |
|
|
|
Post by gerrymk7 on Sept 30, 2016 17:34:37 GMT
I just tried this, but nothing happen, anyone could help me?
|
|
|
|
Post by gordonf238 on Oct 1, 2016 18:01:55 GMT
I've also not followed the usual factory practice of VW to put the Parking Light function and the SSPL function together in the same alpha pair and giving both the same illumination level. Because you wanted the Parking Light to be illuminated at 100%, I've put the SSPL function in a separate alpha-pair and I've given this activity an illumination level of 26 % - which is the factory setting for SSPL. Even though you have LED lights in the DRL fittings, the 26% value helps reduce the current drawn from the battery in SSPL mode. As I said, this is how VW sets-up this function. Finally, because the DRL illumination has been made so high from this tweak, I guarded against the possibility that glare from these lamps overwhelm the turn signal. For this reason, I have given the DRL wink function the highest priority. This means that DRL wink works even when the headlights are switched-on. As I said, I've done this as a safety issue to compensate for the (possible) additional glare to on-coming traffic from the now bright DRL. So, I suggest that you don't remove the DRL wink function Don Hi, and thank you for providing the in-depth explanation with screenshots. I've followed your procedure and like the way it works and looks. Now, with my Bi-Xenon headlamps on at night, the DRLs complement them nicely. I understand about the glare issue, but even with DRLs 100% on alongside low-beam Xenons, they're not any brighter than the Mercedes E-Class LED headlamps. One thing to note, however, that your tweaks introduced the "blink" function when ONLY the DRLs are on during daytime. I would very much like to revert back to having the DRLs on even when blinkers are on (factory default). Sorry to bug you, but would you mind which setting it is that I need to change in order to achieve that? I'm slowly leaning the system (and German alongside of it), so it won't be long before I can figure many of these functions out on my own. Thanks again for your help and patience. |
|
|
|
Post by dv52 (Australia) on Oct 1, 2016 22:39:49 GMT
Hi, and thank you for providing the in-depth explanation with screenshots. I've followed your procedure and like the way it works and looks. Now, with my Bi-Xenon headlamps on at night, the DRLs complement them nicely. I understand about the glare issue, but even with DRLs 100% on alongside low-beam Xenons, they're not any brighter than the Mercedes E-Class LED headlamps. One thing to note, however, that your tweaks introduced the "blink" function when ONLY the DRLs are on during daytime. I would very much like to revert back to having the DRLs on even when blinkers are on (factory default). Sorry to bug you, but would you mind which setting it is that I need to change in order to achieve that? I'm slowly leaning the system (and German alongside of it), so it won't be long before I can figure many of these functions out on my own. Thanks again for your help and patience. Gordon: Good to read that you are beginning to understand Leuchte programming - it's really not that difficult if someone with my advanced level of cranial decrepitude can make sense of it! If there is anything that remains confusing about the topic, please ask, or perhaps my Leuchte programming paper might provide the answers! OK- now to your question. If you want to remove "DRL Wink", do this: 1. for Leuchte3SL VRB21, select Lichtfunktion C 3 and change setting from Blinken rechts aktiv (beide Phasen) to not active2. for Leuchte2SL VLB10, select Lichtfunktion C 2 and change setting from Blinken links aktiv (beide Phasen) to not activeDon |
|
|
|
Post by jdmgolf on Jan 29, 2017 0:37:38 GMT
Leuchte3SL VRB21-Lasttyp 3 > 4 - LED Tagfahrlichtmodul Signal Leuchte3SL VRB21-Lampendefektbitposition 3 > 4C Leuchte3SL VRB21-Fehlerort mittleres Byte DTC-DFCC 3 > 4C Leuchte3SL VRB21-Lichtfunktion A 3 > Tagfahrlicht Leuchte3SL VRB21-Lichtfunktion B 3 > not active Leuchte3SL VRB21-Dimmwert AB 3 > 100 Leuchte3SL VRB21-Lichtansteuerung HD AB 3 > Always Leuchte3SL VRB21-Lichtfunktion C 3 > Blinken rechts aktiv (beide Phasen) Leuchte3SL VRB21-Lichtfunktion D 3 > not active Leuchte3SL VRB21-Dimmwert CD 3 > 0 Leuchte3SL VRB21-Dimming Direction CD 3 > minimize Leuchte3SL VRB21-Lichtfunktion E 3 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte3SL VRB21-Lichtfunktion F 3 > Parking light right Leuchte3SL VRB21-Dimmwert EF 3 > 26 Leuchte3SL VRB21-Dimming Direction EF 3 > maximize Leuchte3SL VRB21-Lichtfunktion G 3 > not active Leuchte3SL VRB21-Lichtfunktion H 3 > not active Leuchte3SL VRB21-Dimmwert GH 3 > 0 Leuchte3SL VRB21-Dimming Direction GH 3 > maximize Leuchte2SL VLB10-Lasttyp 2 > 4 - LED Tagfahrlichtmodul Signal Leuchte2SL VLB10-Lampendefektbitposition 2 > 48 Leuchte2SL VLB10-Fehlerort mittleres Byte DTC-DFCC 2 > 4A Leuchte2SL VLB10-Lichtfunktion A 2 > Tagfahrlicht Leuchte2SL VLB10-Lichtfunktion B 2 > not active Leuchte2SL VLB10-Dimmwert AB 2 > 100 Leuchte2SL VLB10-Lichtansteuerung HD AB 2 > Always Leuchte2SL VLB10-Lichtfunktion C 2 > Blinken links aktiv (beide Phasen) Leuchte2SL VLB10-Lichtfunktion D 2 > not active Leuchte2SL VLB10-Dimmwert CD 2 > 0 Leuchte2SL VLB10-Dimming Direction CD 2 > minimize Leuchte2SL VLB10-Lichtfunktion E 2 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte2SL VLB10-Lichtfunktion F 2 > Parklicht links (beidseitiges Parklicht aktiviert li & re) Leuchte2SL VLB10-Dimmwert EF 2 > 26 Leuchte2SL VLB10-Dimming Direction EF 2 > maximize Leuchte2SL VLB10-Lichtfunktion G 2 > not active Leuchte2SL VLB10-Lichtfunktion H 2 > not active Leuchte2SL VLB10-Dimmwert GH 2 > 0 Leuchte2SL VLB10-Dimming Direction GH 2 > maximize Ive been trying to manually code my DRLs so they are on (dont care if I dont have option for on/off in the head unit, just want them on) copied this code and ended up with still no DRL and only one side turning on with parking lights. Are you sure this code is correct? I have changed back to my default coding and all is well (still no DRL on by default though) |
|
|
|
Post by dv52 (Australia) on Jan 29, 2017 2:15:24 GMT
Care needs to be taken when applying Leuchte-set changes - they don't suit all cars! The country of use and the type of headlight assemblies that are fitted to the car differ and this affects what settings are used. Where do you live and what type of fittings are on the car? And why weren't DRLs enabled from the factory?
Don
|
|
|
|
Post by jdmgolf on Jan 29, 2017 8:11:35 GMT
Care needs to be taken when applying Leuchte-set changes - they don't suit all cars! The country of use and the type of headlight assemblies that are fitted to the car differ and this affects what settings are used. Where do you live and what type of fittings are on the car? And why weren't DRLs enabled from the factory?
Don
thanks for the quick reply! Japan, Golf R with a build a few months old. Japan Golf Rs have the DRLs off as default, Id like them on and its proving mission impossible (OBDeleven support has already given up with the onboard on/off setting on the head unit saying that there must be something with the new Golf R programming and they cant get it to work) Id now be happy just to long code them permanently on. if you need any pics/info etc. Im more than happy to supply them! any help is really appreciated. |
|
|
|
Post by dv52 (Australia) on Jan 29, 2017 9:36:55 GMT
Care needs to be taken when applying Leuchte-set changes - they don't suit all cars! The country of use and the type of headlight assemblies that are fitted to the car differ and this affects what settings are used. Where do you live and what type of fittings are on the car? And why weren't DRLs enabled from the factory?
Don
thanks for the quick reply! Japan, Golf R with a build a few months old. Japan Golf Rs have the DRLs off as default, Id like them on and its proving mission impossible (OBDeleven support has already given up with the onboard on/off setting on the head unit saying that there must be something with the new Golf R programming and they cant get it to work) Id now be happy just to long code them permanently on. if you need any pics/info etc. Im more than happy to supply them! any help is really appreciated. Still haven't told me what sort of headlight fittings (being from Australia, my knowledge of Japanese Golf R isn't that good)! Try this:  |
|
|
|
Post by jdmgolf on Jan 30, 2017 2:50:53 GMT
thanks for the quick reply! Still haven't told me what sort of headlight fittings (being from Australia, my knowledge of Japanese Golf R isn't that good)! Try this: not sure what you mean by headlight fittings? they are stock golf R headlights (whole car is stock), appear to be the same headlights as all other Golf mk7 R? thanks a lot for the code, the support you give should have some sort of reward/pay. will attempt that and let you know how I go. *EDIT. setting was on "not active" which gave me a lot of confidence, but after setting to the 3rd "Daytime running lights" option... still didnt get them to come on any other ideas / info would be much appreciated. NOTE: the DRLs do come on with low beam lights (always did) thought I may have chosen the 2nd option for low beams only by mistake so double checked it was 3rd option for Normal DRLS, but still no good. |
|
|
|
Post by dv52 (Australia) on Jan 30, 2017 6:33:01 GMT
hmm..........check the settings below against those in your car:
Left side
Leuchte4TFL LB4-Lasttyp 4 > 1 - LED Tagfahrlichtmodul Versorgung
Leuchte4TFL LB4-Lampendefektbitposition 4 > 3A
Leuchte4TFL LB4-Fehlerort mittleres Byte DTC-DFCC 4 > 49
Leuchte4TFL LB4-Lichtfunktion A 4 > Tagfahrlicht
Leuchte4TFL LB4-Lichtfunktion B 4 > not active
Leuchte4TFL LB4-Dimmwert AB 4 > 127
Leuchte4TFL LB4-Lichtansteuerung HD AB 4 > Always
Leuchte4TFL LB4-Lichtfunktion C 4 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Leuchte4TFL LB4-Lichtfunktion D 4 > Parklicht links (beidseitiges Parklicht aktiviert li & re)
Leuchte4TFL LB4-Dimmwert CD 4 > 127
Leuchte4TFL LB4-Dimming Direction CD 4 > maximize
Leuchte4TFL LB4-Lichtfunktion E 4 > not active
Leuchte4TFL LB4-Lichtfunktion F 4 > not active
Leuchte4TFL LB4-Dimmwert EF 4 > 0
Leuchte4TFL LB4-Dimming Direction EF 4 > maximize
Leuchte4TFL LB4-Lichtfunktion G 4 > not active
Leuchte4TFL LB4-Lichtfunktion H 4 > not active
Leuchte4TFL LB4-Dimmwert GH 4 > 0
Leuchte4TFL LB4-Dimming Direction GH 4 > maximize
Right side
Leuchte5 TFL RB32-Lasttyp 5 > 1 - LED Tagfahrlichtmodul Versorgung
Leuchte5 TFL RB32-Lampendefektbitposition 5 > 44
Leuchte5 TFL RB32-Fehlerort mittleres Byte DTC-DFCC 5 > 4B
Leuchte5 TFL RB32-Lichtfunktion A 5 > Tagfahrlicht
Leuchte5 TFL RB32-Lichtfunktion B 5 > not active
Leuchte5 TFL RB32-Dimmwert AB 5 > 127
Leuchte5 TFL RB32-Lichtansteuerung HD AB 5 > Always
Leuchte5 TFL RB32-Lichtfunktion C 5 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Leuchte5 TFL RB32-Lichtfunktion D 5 > Parklicht rechts
Leuchte5 TFL RB32-Dimmwert CD 5 > 127
Leuchte5 TFL RB32-Dimming Direction CD 5 > maximize
Leuchte5 TFL RB32-Lichtfunktion E 5 > not active
Leuchte5 TFL RB32-Lichtfunktion F 5 > not active
Leuchte5 TFL RB32-Dimmwert EF 5 > 0
Leuchte5 TFL RB32-Dimming Direction EF 5 > maximize
Leuchte5 TFL RB32-Lichtfunktion G 5 > not active
Leuchte5 TFL RB32-Lichtfunktion H 5 > not active
Leuchte5 TFL RB32-Dimmwert GH 5 > 0
Leuchte5 TFL RB32-Dimming Direction GH 5 > maximize
|
|
|
|
Post by jdmgolf on Jan 30, 2017 7:03:40 GMT
hmm..........check the settings below against those in your car:
Left sideLeuchte4TFL LB4-Lasttyp 4 > 1 - LED Tagfahrlichtmodul Versorgung Leuchte4TFL LB4-Lampendefektbitposition 4 > 3A Leuchte4TFL LB4-Fehlerort mittleres Byte DTC-DFCC 4 > 49 Leuchte4TFL LB4-Lichtfunktion A 4 > Tagfahrlicht Leuchte4TFL LB4-Lichtfunktion B 4 > not active Leuchte4TFL LB4-Dimmwert AB 4 > 127 Leuchte4TFL LB4-Lichtansteuerung HD AB 4 > Always Leuchte4TFL LB4-Lichtfunktion C 4 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte4TFL LB4-Lichtfunktion D 4 > Parklicht links (beidseitiges Parklicht aktiviert li & re) Leuchte4TFL LB4-Dimmwert CD 4 > 127 Leuchte4TFL LB4-Dimming Direction CD 4 > maximize Leuchte4TFL LB4-Lichtfunktion E 4 > not active Leuchte4TFL LB4-Lichtfunktion F 4 > not active Leuchte4TFL LB4-Dimmwert EF 4 > 0 Leuchte4TFL LB4-Dimming Direction EF 4 > maximize Leuchte4TFL LB4-Lichtfunktion G 4 > not active Leuchte4TFL LB4-Lichtfunktion H 4 > not active Leuchte4TFL LB4-Dimmwert GH 4 > 0 Leuchte4TFL LB4-Dimming Direction GH 4 > maximize
Right sideLeuchte5 TFL RB32-Lasttyp 5 > 1 - LED Tagfahrlichtmodul Versorgung Leuchte5 TFL RB32-Lampendefektbitposition 5 > 44 Leuchte5 TFL RB32-Fehlerort mittleres Byte DTC-DFCC 5 > 4B Leuchte5 TFL RB32-Lichtfunktion A 5 > Tagfahrlicht Leuchte5 TFL RB32-Lichtfunktion B 5 > not active Leuchte5 TFL RB32-Dimmwert AB 5 > 127 Leuchte5 TFL RB32-Lichtansteuerung HD AB 5 > Always Leuchte5 TFL RB32-Lichtfunktion C 5 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte5 TFL RB32-Lichtfunktion D 5 > Parklicht rechts Leuchte5 TFL RB32-Dimmwert CD 5 > 127 Leuchte5 TFL RB32-Dimming Direction CD 5 > maximize Leuchte5 TFL RB32-Lichtfunktion E 5 > not active Leuchte5 TFL RB32-Lichtfunktion F 5 > not active Leuchte5 TFL RB32-Dimmwert EF 5 > 0 Leuchte5 TFL RB32-Dimming Direction EF 5 > maximize Leuchte5 TFL RB32-Lichtfunktion G 5 > not active Leuchte5 TFL RB32-Lichtfunktion H 5 > not active Leuchte5 TFL RB32-Dimmwert GH 5 > 0 Leuchte5 TFL RB32-Dimming Direction GH 5 > maximize checked settings, only difference was Leuchte4TFL LB4-Lasttyp 4 > 1 - LED Tagfahrlichtmodul Versorgung Leuchte5 TFL RB32-Lasttyp 5 > 1 - LED Tagfahrlichtmodul Versorgung ^^both set to option 6, changed to 1 on both but still no DRLs active. |
|
|
|
Post by dv52 (Australia) on Jan 30, 2017 8:33:40 GMT
hmm..........check the settings below against those in your car: checked settings, only difference was Leuchte4TFL LB4-Lasttyp 4 > 1 - LED Tagfahrlichtmodul Versorgung Leuchte5 TFL RB32-Lasttyp 5 > 1 - LED Tagfahrlichtmodul Versorgung ^^both set to option 6, changed to 1 on both but still no DRLs active. Hmm...... this is getting difficult (for both of us) - are you sure that the effort is worth it?
I have a Japanese 2014 Gti DSG in my database that has the setting for Werkseinstellung fuer Tagfahrlicht Freischaltung BAP / Bedienfolge as active- same as in the picture below (which is from my test bench). I assumed that your car was the same so I haven't mentioned it- please check the setting and advise
|
|
|
|
Post by jdmgolf on Jan 30, 2017 9:54:09 GMT
checked settings, only difference was Leuchte4TFL LB4-Lasttyp 4 > 1 - LED Tagfahrlichtmodul Versorgung Leuchte5 TFL RB32-Lasttyp 5 > 1 - LED Tagfahrlichtmodul Versorgung ^^both set to option 6, changed to 1 on both but still no DRLs active. Hmm...... this is getting difficult (for both of us) - are you sure that the effort is worth it?
I have a Japanese 2014 Gti DSG in my database that has the setting for Werkseinstellung fuer Tagfahrlicht Freischaltung BAP / Bedienfolge as active- same as in the picture below (which is from my test bench). I assumed that your car was the same so I haven't mentioned it- please check the setting and advise
by default that setting was non active! but I had already changed the settings to match your original pic from before... so had changed that to active already. Unfortunately still no go on the DRLs. If its too troublesome I understand, the support you have already provided is exceptional and I really appreciate it. I would really like them on if possible (it was the whole reason for me getting into OBDeleven and then ordering the Pro Version in the first place) do you think its an option I can pay the VW dealer to setup for me? |
|
|
|
Post by dv52 (Australia) on Jan 30, 2017 22:46:57 GMT
Hmm...... this is getting difficult (for both of us) - are you sure that the effort is worth it?
I have a Japanese 2014 Gti DSG in my database that has the setting for Werkseinstellung fuer Tagfahrlicht Freischaltung BAP / Bedienfolge as active- same as in the picture below (which is from my test bench). I assumed that your car was the same so I haven't mentioned it- please check the setting and advise
by default that setting was non active! but I had already changed the settings to match your original pic from before... so had changed that to active already. Unfortunately still no go on the DRLs. If its too troublesome I understand, the support you have already provided is exceptional and I really appreciate it. I would really like them on if possible (it was the whole reason for me getting into OBDeleven and then ordering the Pro Version in the first place) do you think its an option I can pay the VW dealer to setup for me? Last suggestion! Here are the default settings for a Golf R from Germany for the DRL parent channel group:
Daytime running lights Scheinwerferferreinigungsansteuerung und Abblendlichtanzeige bei Dauerfahrlicht > not active Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich > active Werkseinstellung fuer Tagfahrlicht Freischaltung BAP / Bedienfolge > active Standlicht aktiviert zusaetzlich Tagfahrlicht > active Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten > active Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht > not active Tagfahrlichtkontrollleuchte > not active Fahrlicht bei Tag > Daytime running lights Tagfahrlicht nur in Schalterstellung AUTO > not active Sure try the dealer, but here in Australia, it's very difficult to get dealers to do anything that isn't "standard". Might be different in Japan. If you do manage to get the DRLs to work, please tell us how you did it - I always enjoy learning! |
|
|
|
Post by darkknightm4 on Jan 31, 2017 4:31:10 GMT
|
|
|
|
Post by jdmgolf on Jan 31, 2017 6:49:34 GMT
Last suggestion! Here are the default settings for a Golf R from Germany for the DRL parent channel group:
Daytime running lights Scheinwerferferreinigungsansteuerung und Abblendlichtanzeige bei Dauerfahrlicht > not active Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich > active Werkseinstellung fuer Tagfahrlicht Freischaltung BAP / Bedienfolge > active Standlicht aktiviert zusaetzlich Tagfahrlicht > active Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten > active Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht > not active Tagfahrlichtkontrollleuchte > not active Fahrlicht bei Tag > Daytime running lights Tagfahrlicht nur in Schalterstellung AUTO > not active Sure try the dealer, but here in Australia, it's very difficult to get dealers to do anything that isn't "standard". Might be different in Japan. If you do manage to get the DRLs to work, please tell us how you did it - I always enjoy learning! Unfortunately no go on those either (one setting changed from inactive to active but didnt make a difference) Even though you couldnt find a solution, I honestly feel like I owe you something for you time. you got paypal? I definitely owe you a couple of beers. |
|
|
|
Post by dv52 (Australia) on Jan 31, 2017 8:33:34 GMT
Unfortunately no go on those either (one setting changed from inactive to active but didnt make a difference) Even though you couldnt find a solution, I honestly feel like I owe you something for you time. you got paypal? I definitely owe you a couple of beers. No - no payment needed and I would be delighted if you drank the beers for me up there in a Japanese pub - not sure if you have these! I'm just disappointed (and annoyed) that I couldn't fix it for you!
Don
|
|
|
|
Post by jdmgolf on Feb 10, 2017 1:15:07 GMT
Unfortunately no go on those either (one setting changed from inactive to active but didnt make a difference) Even though you couldnt find a solution, I honestly feel like I owe you something for you time. you got paypal? I definitely owe you a couple of beers. No - no payment needed and I would be delighted if you drank the beers for me up there in a Japanese pub - not sure if you have these! I'm just disappointed (and annoyed) that I couldn't fix it for you!
Don
Update!! you arent going to like this as its vague and I dont really know what got it to work... after OBDeleven support werent able to help and yourself wasnt able to get it working I went at it like a frustrated dad with out any instructions swapping settings on and off and changing values (usually back to the default value if I couldnt tell if there was any difference). I modified the brightness level of the DRLs while on low beam (Im sure this made no difference to the out come) and while looking at any updates to Apps noticed the "DRL in light menu" app was now set to OFF, this was previous ON after running the APP but still wasnt showing in the lights menu... Id changed so many things I cant remember if Id done that manually or if the App has been updated and could tell something was wrong. Anyway ran the app again and this time the "DRL in light menu" became an option!! I excitedly checked to "on" via the media unit setting but still nothing... turned to "off", then back to "on" and presto suddenly DRLs working!! Im not sure exactly what got them to work but Id assume it must have been in some of the settings you had got me to change previously that must have made the App happy (settings that it needed to work) and after running the App again all fell into place. Thanks again for the effort and time spent helping me out, Im quite sure some of the coding you helped me with was what got the App to work. |
|
|
|
Post by vikmeister on Feb 14, 2017 9:34:58 GMT
Hi Don,
Can you post the setting combinations for Australian version. Made my rear tail light run as drl but when i reverted now the front drls does not light up wih low beam 😞
|
|
|
|
Post by dv52 (Australia) on Feb 14, 2017 23:42:36 GMT
Hi Don, Can you post the setting combinations for Australian version. Made my rear tail light run as drl but when i reverted now the front drls does not light up wih low beam 😞 ^^^^ huh? How did you do that ?. So, just to be clear - you are saying that you made your rear tail lights run as DRLs and now your front DRLs work in daylight, but not as a parking light - is this correct? hmm........ can you post up a copy of your history file, or tell me what instructions you used? Don |
|
|
|
Post by vikmeister on Feb 15, 2017 8:33:05 GMT
Hi Don, To make the rear tail lights work as DRL i used the instructions here -> www.golfmk7.com/forums/showthread.php?t=11368Post #14 If by Parking light you mean at night when low beam is on then no, the Front DRLs does not turn on. But i noticed that it does have the wink to it when i indicate right or left. Looks like i made a couple of changes to those modules not knowing what it was doing :-( 1. Leuchte2SL VLB10 2. Leuchte3SL VRB21 I think these 2 are the culprits: I've tried changing a couple of those settings in the above 2 mentioned module based on the instruction in this post which you would see in the Central_electrics_history but that did not help. I might need to verify what i have in Leuchte4TFL LB4 and Leuchte5 TFL RB32 against the ones you posted here. Central_Electrics_history.txt (24.6 KB) Full_history.txt (30.24 KB) Thanks Vicky |
|
|
|
Post by dv52 (Australia) on Feb 15, 2017 23:13:16 GMT
Vicky: Hi again. Please don't read this the wrong way - and I certainly don't mean to be rude, but try as I may, I couldn't follow your intentions in the history file records. But you certainly have been prolific and I do admire the obvious tenacity in the records at trying to solve this problem!!!
So - given my inability to fathom your purpose in the history file, I suspect that your first request is the correct way forward: Compare the settings for the 4 x Leuchte-sets for the front DRLs of your Aussie Golf R with those of the factory settings on an Aussie Golf R -see below (notice that the lichtfunktion settings for the Left/Right pairs are the same). Note- These default settings don't include "DRL wink" because it appears that this facility wasn't factory-set for the car in my database
Don
Front DRLs: Golf R (RoW) - Australia
Leuchte2SL VLB10
Lasttyp 2 > 4 - LED Tagfahrlichtmodul Signal
Lampendefektbitposition 2 > 48
Fehlerort mittleres Byte DTC-DFCC 2 > 4A
Lichtfunktion A 2 > Tagfahrlicht
Lichtfunktion B 2 > not active
Dimmwert AB 2 > 100
Lichtansteuerung HD AB 2 > Always
Lichtfunktion C 2 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 2 > Parklicht links (beidseitiges Parklicht aktiviert li & re)
Dimmwert CD 2 > 26
Dimming Direction CD 2 > maximize
Lichtfunktion E 2 > not active
Lichtfunktion F 2 > not active
Dimmwert EF 2 > 0
Dimming Direction EF 2 > maximize
Lichtfunktion G 2 > not active
Lichtfunktion H 2 > not active
Dimmwert GH 2 > 0
Dimming Direction GH 2 > maximize
Leuchte3SL VRB21
Lasttyp 3 > 4 - LED Tagfahrlichtmodul Signal
Lampendefektbitposition 3 > 4C
Fehlerort mittleres Byte DTC-DFCC 3 > 4C
Lichtfunktion A 3 > Tagfahrlicht
Lichtfunktion B 3 > not active
Dimmwert AB 3 > 100
Lichtansteuerung HD AB 3 > Always
Lichtfunktion C 3 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 3 > Parklicht rechts
Dimmwert CD 3 > 26
Dimming Direction CD 3 > maximize
Lichtfunktion E 3 > not active
Lichtfunktion F 3 > not active
Dimmwert EF 3 > 0
Dimming Direction EF 3 > maximize
Lichtfunktion G 3 > not active
Lichtfunktion H 3 > not active
Dimmwert GH 3 > 0
Dimming Direction GH 3 > maximize
Leuchte4TFL LB4
Lasttyp 4 > 6 - LED Lichtmodul
Lampendefektbitposition 4 > 3A
Fehlerort mittleres Byte DTC-DFCC 4 > 49
Lichtfunktion A 4 > Tagfahrlicht
Lichtfunktion B 4 > not active
Dimmwert AB 4 > 127
Lichtansteuerung HD AB 4 > Always
Lichtfunktion C 4 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 4 > Parklicht links (beidseitiges Parklicht aktiviert li & re)
Dimmwert CD 4 > 127
Dimming Direction CD 4 > maximize
Lichtfunktion E 4 > not active
Lichtfunktion F 4 > not active
Dimmwert EF 4 > 0
Dimming Direction EF 4 > maximize
Lichtfunktion G 4 > not active
Lichtfunktion H 4 > not active
Dimmwert GH 4 > 0
Dimming Direction GH 4 > maximize
Leuchte5 TFL RB32
Lasttyp 5 > 6 - LED Lichtmodul
Lampendefektbitposition 5 > 44
Fehlerort mittleres Byte DTC-DFCC 5 > 4B
Lichtfunktion A 5 > Tagfahrlicht
Lichtfunktion B 5 > not active
Dimmwert AB 5 > 127
Lichtansteuerung HD AB 5 > Always
Lichtfunktion C 5 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 5 > Parklicht rechts
Dimmwert CD 5 > 127
Dimming Direction CD 5 > maximize
Lichtfunktion E 5 >not active
Lichtfunktion F 5 > not active
Dimmwert EF 5 > 0
Dimming Direction EF 5 > maximize
Lichtfunktion G 5 > not active
Lichtfunktion H 5 > not active
Dimmwert GH 5 > 0
Dimming Direction GH 5 > maximize
|
|
