|
Post by wsmc549 on Nov 2, 2019 23:55:30 GMT
Looking for a guide to remove error codes after I installed LED low beams in my 2007 A4 2.0t. Not sure how ODB eleven does not offer the common things as one touch option sin the app. Anyway. Does anyone have the step by step on how to remove the error code? (left dipped headlight and right dipped headlight) . I'll start the instructions with this... - Connect to app to the vehicle
- Select Central electronics
- Choose this thingy
- Tape this thang
- Click the wiggle widget
- Type Hocus Pocus
- Repeat for the other headlight....
Thanks in advance.
|
|
|
Post by wsmc549 on Jan 23, 2020 3:06:19 GMT
So far not impressed at all with ODB11. There really is no support for the common user. Still can't find how to remove the idiot light with LED Headlight bulbs.
|
|
|
Post by mgaudi on Mar 28, 2020 7:57:39 GMT
I just bought the iOS pro $100 bucks and I can’t find a way to turn off the fog light error. I recently change them to led.
|
|
|
Post by wsmc549 on Mar 28, 2020 16:00:20 GMT
I gave up on headlight adaptation to led. Now I am trying to code a new battery but the scanner does not se Gateway 19 so I can't get to battery adaptation! Useless hunk of shit!
|
|
|
Post by norad97 on Apr 3, 2020 13:10:43 GMT
You don't need to code a battery on a A4 B7, it is not a Can Bus car, You need to put resistors in line to remove bulb out error.
|
|
|
Post by ahidley on Apr 4, 2023 3:53:38 GMT
Please define "dont need to code a battery in a b7" Does your statement mean that coding a battery in a b7 is not available or does it mean that the battery might work fine eventhough it's not coded?
|
|
|
Post by carmadste on Apr 27, 2024 16:39:35 GMT
LED lights need resistors in line, or built in. GTR Lighting 2.0, Morimoto and Xenon Depot are the only bulbs that will work without errors or adding resistors. Amazon and ebay rubbish just give an error and flicker and blind oncoming cars.
On a B7 you can fit a new battery and the job is done. You dont need to/cannot code the battery to the car.
|
|