|
Post by snaker32 on Oct 29, 2019 10:25:32 GMT
I've got a question about the headlights on my golf 7.5 with "simple led" I've got the \_ _/ and not the \_\_ _/_/. Now is my question: I want my white drls orange and when I turn the blinkers on it needs to be blinking white. Or if its not possible, only blinking oranje. Just the opposite of default from factory. (here in EU) But the most important what I want is that the Amber (corner blinking lights) shining always. Same as US standlight golf 5. I've searched everything but I can't find it. I only find it for the golf 7. Golf 7.5 halogen. Not the 7.5 with led (lowbeam)
Anyone?
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 111
|
Post by 2018gti on Nov 19, 2019 2:17:08 GMT
Yeah unfortunately, as far I know, the LED lighting system in the 7.5 is controlled by LCMs and other modules (module 29, 39, D6, and D7). It's not controlled by "Leuchte" channels anymore as it was/is in the halogen models and Golf 7. And these new modules, either they are impossible to program by adaptation and long coding, or the coding hasn't been discovered yet. I think more likely it's the first.
I'm sure someone is going to crack the coding or figure out how to modify them properly, it just hasn't happened yet.
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 111
|
Post by 2018gti on Jan 24, 2020 16:44:39 GMT
:/ no news unfortunately. But you got me thinking about it again. There is a power module on the bottom of the headlights, if there is one pin for the white LEDs and one pin for the orange LEDs, you could in theory just swap the wiring and get that behavior. White lights = turn signals and orange lights = DRLs. I don’t feel like taking the bumper off to try this though, lol.
|
|
|
Post by rudy0725 on Jan 25, 2020 12:37:25 GMT
vous avez une photo pour voir s'il vous plais
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 111
|
Post by 2018gti on Jan 25, 2020 20:26:11 GMT
Bien sûr. Je ne parle pas français mais j'aime le pratiquer, lol. Ma faute, le module particulier n'est pas en bas du 'headlight', mais est à l'arrière. Donc il n'y a pas besoin de 'remove the bumper'. Voici un wiring diagram pour les headlights.
|
|
|
Post by rudy0725 on Jan 25, 2020 22:53:49 GMT
vous avez pas un face book pour mieux ce parler ? car je vois pas ou il ce trouve
|
|
|
Post by rudy0725 on Jan 28, 2020 12:08:41 GMT
/Users/rudy/Downloads/image0-11.jpeg
|
|
|
Post by rudy0725 on Jan 29, 2020 21:00:15 GMT
Bien sûr. Je ne parle pas français mais j'aime le pratiquer, lol. Ma faute, le module particulier n'est pas en bas du 'headlight', mais est à l'arrière. Donc il n'y a pas besoin de 'remove the bumper'. Voici un wiring diagram pour les headlights.
|
|