|
|
Post by add100 on Oct 18, 2019 5:38:41 GMT
Is there any pro code I can use to make the car beep with the short honk after the first time I lock it? It normally does it but I have to lock it twice to hear the locked confirmation beep.
Thanks
2019 Golf R
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Oct 18, 2019 16:07:15 GMT
If you have prolicense you can check
Module 09 Central Electrics
-Adaption
--Acknowledgement signals
---Quittierton bei zweitem ZV-ZU-Befehl: not_active (if it says active change it to not_active and see if it solves your question)
|
|
|
|
Post by add100 on Oct 20, 2019 3:29:24 GMT
Thanks!
It seems to have worked.
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Oct 20, 2019 10:26:33 GMT
I am glad it worked, Enjoy!
|
|
|
|
Post by spudboy53b on Dec 31, 2019 16:18:35 GMT
I have a related question. I owned a '16 Golf R (NAR spec) and it always locked with the beep on the first press of the door handle. On my new '19 R, it behaves as described above - first touch locks the doors, but no beep. 2nd touch, then I get the beep. According to the owner's manual, the beep means the alarm is set, while no beep means the door is merely locked, but no alarm. So, at least for now, I need 2 touches to get the alarm set.
If I perform the above, it doesn't sound like it's changing that behavior, only causing the beep to sound on the first press. Makes me think that 2 presses are still required to set the alarm. Can anyone confirm this, and if true, can the car be coded to both lock the doo AND set the alarm with a single touch, as my '16 did? Thanks.
|
|
|
|
Post by awd4416 on Jan 3, 2020 14:43:59 GMT
I have a related question. I owned a '16 Golf R (NAR spec) and it always locked with the beep on the first press of the door handle. On my new '19 R, it behaves as described above - first touch locks the doors, but no beep. 2nd touch, then I get the beep. According to the owner's manual, the beep means the alarm is set, while no beep means the door is merely locked, but no alarm. So, at least for now, I need 2 touches to get the alarm set. If I perform the above, it doesn't sound like it's changing that behavior, only causing the beep to sound on the first press. Makes me think that 2 presses are still required to set the alarm. Can anyone confirm this, and if true, can the car be coded to both lock the doo AND set the alarm with a single touch, as my '16 did? Thanks. After activating my alarm via coding on my NAR 19 GTI, I tested the alarm function by leaving the back window down locking the door and reaching in to open the door (it set off the alarm). Have you tried this? I can give it a go later as I coded the car this way after installing the euro chirp alarm. |
|
|
|
Post by awd4416 on Jan 3, 2020 15:55:19 GMT
Just checked out the behavior of my GTI. The only way I got the alarm to go off is by opening the rear window and locking the GTI. Regardless of the clicks to lock, there looks to be a grace period before the alarm is engaged and it goes off. There is a setting in module 9 that mentions NAR locking, not sure if that makes any difference to the behavior.
|
|
2018gti
Full Member
2018 GTI Autobahn 6-speed
Posts: 111
|
Post by 2018gti on Jan 4, 2020 1:30:11 GMT
Just checked out the behavior of my GTI. The only way I got the alarm to go off is by opening the rear window and locking the GTI. Regardless of the clicks to lock, there looks to be a grace period before the alarm is engaged and it goes off. There is a setting in module 9 that mentions NAR locking, not sure if that makes any difference to the behavior. If you mean “Autounlock NAR” then that’s actually a different behavior, when that is active, all doors are automatically unlocked when you press Start/Stop to turn the engine off. And personally I think this is dumb behavior so I deactivated it. |
|
13
New Member
Posts: 24
|
Post by 13 on Jan 7, 2020 16:19:12 GMT
Also, if you want the doors to lock when you close them, try this:
B7 - Start system interface
Adaptations - internal_passive_entry_exit_byte_1 (search for 'pass' in lowercase or it might not show up)
Activate 'passive_exit_door_slam_lock'
Save changes - enter code 20103 if it asks.
Then on the infotainment screen:
Car > Settings > Reset > Opening and Closing
Not sure if the reset at the end is necessary or not.
And this only works on 2019s.
|
|
